Releasing Pin Lock - Panasonic Foma p705im Instruction Manual

< UIM Setting >
Setting PIN Code
PIN1 Code Entry Set
You can set the FOMA phone not to work unless you enter your PIN1
code when turning on the power.
m1Settings1Lock/Security1UIM setting
1
1Enter your Terminal Security Code
1PIN1 code entry set1ON or OFF
1Enter the PIN1 code.
≥ See page 121 for the PIN1 code.
Change PIN1 Code/Change PIN2 Code
You need to have set "PIN1 code entry set" to "ON" to change the
PIN1 code.
m1Settings1Lock/Security1UIM setting
1
1Enter your Terminal Security Code
1Change PIN1 code or Change PIN2 code
1Enter the current PIN1 code/PIN2 code.
≥ See page 121 for the PIN1 code/PIN2 code.
2
Enter a new PIN1 code/PIN2 code (four to eight digits).
≥ The entered PIN1 code/PIN2 code is displayed as "_".
3
Enter the new PIN1 code/PIN2 code again.
122

Releasing PIN Lock

If you enter a wrong PIN1 code/PIN2 code three times in succession
on the display requiring its entry, it is locked and the FOMA phone
cannot be used. In this case, release the PIN1 code/PIN2 code lock
and set a new PIN1 code/PIN2 code.
1
Enter the PUK (PIN unblock code)
(eight digits).
≥ The entered unblock code is displayed as "_".
2
Enter a new PIN1 code/PIN2 code (four to eight digits).
≥ The entered PIN1 code/PIN2 code is displayed as "_".
3
Enter the new PIN1 code/PIN2 code again.
< >
Lock All
Locking your Phone to Prevent Use by
Others
If you set Lock All, you can do no operations other than answering
calls and turning on/off the power.
m1Settings1Lock/Security1Lock all
1
1Enter your Terminal Security Code.
" " and "Lock all" appear and Lock All is set.
≥ To release Lock All, enter your Terminal Security Code from the Stand-by
display. Even if you turn off the power, Lock All will not be released.