Foma Pc Setup Software; Communication Setting By Foma Pc Setup Software - Panasonic Foma p705im Instruction Manual

FOMA PC Setup Software

To connect the FOMA phone to a personal computer
and perform the packet communication or 64K data
communication, you need to configure various settings
related to the communication. Using the "FOMA PC
setup software", you can easily carry out the settings
below. If required, you can set the packet
communication and 64K data communication without
using the "FOMA PC setup software". (See page 42 and
page 45)
Easy setting
You can easily carry out "dial-up creation for FOMA data communication"
by following the guidance.
Access point name (APN) setting
You can set an access point name (APN) required for packet
communication.
The FOMA packet communication does not use an ordinary phone
number as an access point unlike the 64K data communication.
You need to register an access point name (APN) in the FOMA phone in
advance, and specify the registration number (cid) in the access point
number field for connection.
By the default, "mopera.ne.jp", the access point name (APN) of "mopera",
is registered in cid 1, and "mopera.net", that of "mopera U", is registered
in cid 3. To connect to another service provider or Intranet LAN,
however, you need to set the access point name (APN).
"cid" is the abbreviation of "Context Identifier", the number for storing
the packet communication access point (APN) to the FOMA phone.
Information
≥If the old-version "FOMA
communication setup software)" or the older version than this "FOMA
PC (FOMA PC setup software)" (older than version 4.0.0) is
installed, uninstall it in advance.
Communication Setting by FOMA PC
Setup Software
Install the "FOMA PC setup software".
See page 34 for installation.
If the older version than this "FOMA PC setup software" (version
4.0.0) is already installed, you cannot install this "FOMA PC setup
software", so uninstall it in advance. See page 35 if the display
appears to indicate that the old-version "FOMA
(FOMA data communication setup software)" is installed.
Prepare for setup.
Before setup, confirm that the FOMA phone is connected to your
personal computer and correctly recognized by the personal
computer. See page 4 for how to connect the FOMA USB Cable with
Charge Function 01 (option).
If the FOMA phone is not correctly recognized by the personal
computer, you cannot carry out settings and communication. See
page 32 for confirming whether the FOMA phone is correctly
recognized by the personal computer.
See page 31 through page 32 for how to install the "FOMA
communication setup files" (driver).
(FOMA data
Carry out the appropriate setting for the
communication you use.
Setting the packet communication from "Easy Setting"
Setting the 64K data communication from "Easy Setting"
See page 41 for setting an access point name (APN).
Connect to the Internet.
33
STEP1 Install Software
STEP2 Prepare for Setup
STEP3 Setting Operation
When using "mopera U" or "mopera" as an access point
............................................................................................ page 36
When using a provider other than "mopera U" or "mopera"
............................................................................................ page 37
When using "mopera U" or "mopera" as an access point
............................................................................................ page 38
When using a provider other than "mopera U" or "mopera"
............................................................................................ page 39
STEP4 Connection