For Using Windows Vista; Installing Foma Communication Setup Files (Driver) - Panasonic Foma p705im Instruction Manual

For Using
Windows Vista
Installing FOMA Communication Setup
Files (Driver)
Installing the FOMA communication setup files (driver)
is required when you connect the FOMA phone to your
personal computer via the FOMA USB Cable with
Charge Function 01 (option) for the first time.
≥Operate as the user who has the PC administrator right.
1
Connect the FOMA phone and the FOMA USB
Cable with Charge Function 01. (See page 4)
2
Start Windows, then set the provided "FOMA
P705i /PROSOLID
personal computer.
3
Click "
(Data link software/Setup software)".
≥If this display appears during installation of the "FOMA
communication setup files" (driver), close the display.
CD-ROM" into the
4
Click "
communication setup files (USB driver)]".
5
Double click "FOMAinst.exe" in opened
folder.
6
Read "
licensing contract)", and click "
(Agree)".
7
Turn on the power to the FOMA phone, then
connect the FOMA USB Cable with Charge
Function 01, which is already connected to
the FOMA phone, to the personal computer.
Installation starts.
Pop-up message "
hardware was found)" appears for a few seconds from the indicator
of the task bar.
After you complete the installation, pop-up message "
The device driver software was installed correctly.)" appears for a
few seconds from the indicator of the task bar.
31
(Install)" under "
[FOMA
(Software
(New
(The system is ready to use the device.