Panasonic Foma p705im Instruction Manual page 244

≥ For service contents and details of
subscriptions, refer to the i-mode site of
DCMX.
i-mode site: iMenu DCMX iD
Information
≥ To start this application program for the first time, you need to agree with "
(Cautions in use)".
≥ You are charged a packet communication fee for settings and operations.
Cautions on Osaifu-Keitai compatible i-αppli
Note that we take no responsibility for any information set on your IC card.
i-αppli Settings
< >
Setting i-αppli
m1i-αppli1i-αppli settings
1
1Do the following operations.
Item
Auto start setting See page 242.
Disp. software info See page 231.
Preferred tone You can set which sound to be output preferentially, from
MUSIC or i-αppli program, for when you start an i-αppli
program during music playback.
1MUSIC or iαppli
αBacklight
You can set the backlight operation for when an i-αppli
program is running.
1Select an item.
Depend on system . . . . Follows the setting of "Backlight".
Depend on software . . . Follows the setting of each software
Constant light . . . . . . . . Lights constantly.
242
QR code for
accessing the site
Operation/Explanation
program.
Item
αPower saver
You can set to Power Saver Mode to decrease battery
consumption by suspending the i-αppli program temporarily for
when you close the FOMA phone during i-αppli running.
1ON or OFF
≥ This setting is valid from when an i-αppli program starts until
it closes.
≥ Even when this function is set to "ON", Power Saver Mode
becomes invalid if "Power saver" that can be set for each
i-αppli program is set to "OFF".
αVibrator
You can set the vibrator operation for when an i-αppli program
is running.
1Depend on system or Depend on software
Depend on system
. . . Does not work regardless of the setting of "Vibrator". With
some software programs, the vibrator works.
Depend on software
. . . Follows the setting of each software program.
Check settings You can check each of "i-αppli settings".
Information
<αBacklight> <αVibrator>
≥ With some software programs, the backlight and vibrator settings are "OFF".
Consequently, if you set "Depend on software", the backlight and vibrator will not
work; if you want them to work, set "Depend on system".
Starting i-αppli Automatically
You can make an i-αppli program start automatically at the set date and
time. Set the date and time for automatic start using Auto Start Time.
Auto Start Setting
You can set whether to enable automatic start of i-αppli programs.
m1i-αppli1i-αppli settings1Auto start setting
1
1ON or OFF
Operation/Explanation