Answering A Call Automatically When Earphone Is Connected - Panasonic Foma p705im Instruction Manual

Table of Contents

Advertisement

2
After talking, press and hold the switch of the
Flat-plug Earphone/Microphone with Switch for at
least one second to end the call.
A beep sounds twice and you are disconnected.
Information
≥ Regardless of the setting for "Keypad sound", a tone for connecting and
disconnecting the line sounds.
≥ Note that you might be connected if you try to connect the Flat-plug Earphone/
Microphone with Switch after the ring tone sounds.
≥ To release hold, press the switch of the Flat-plug Earphone/Microphone with
Switch during answer-hold (On Hold) and while a call is on hold (Holding). (When
a videophone call is put on hold, the camera image is sent and the videophone
call starts.)
≥ Do not press or release the switch of the Flat-plug Earphone/Microphone with
Switch in succession. You might be automatically connected.
≥ If you have signed up for Call Waiting Service and "Multi calling" is displayed
during a call, you can switch two calls by pressing and holding the switch of the
Flat-plug Earphone/Microphone with Switch for at least one second. However,
you cannot use the switch to end the call.
≥ You can adjust the earpiece volume by pressing
call.
<
>
Headset Switch to Call
Selecting a Call Destination when
Earphone is Connected
When "Headset switch to call" is set to "Voice call" and the Stand-by
display is shown, you can press the switch on the Flat-plug Earphone/
Microphone with Switch (option) to make voice calls.
m1Settings1Other settings1Headset switch to call
1
1Voice call or OFF
≥ You can check the currently set phonebook entry by pressing l(
2
Search the Phonebook1Select an entry.
< (raise) or
.
> (lower) during a
.
).
Information
≥ When the Phonebook entry contains multiple phone numbers, the first phone
number is set.
≥ If you delete the set Phonebook entry, the Phonebook entry stored in the memory
number 999 is automatically set to Headset Switch to Call.
<
>
Auto Answer Setting
Answering a Call Automatically when
Earphone is Connected
If a call comes in while the Flat-plug Earphone/Microphone with
Switch (option) is connected, the FOMA phone automatically answers
the call after the specified ring time elapses.
m1Settings1Incoming call1Auto answer setting
1
1ON or OFF1Enter a ring time (seconds).
≥ Enter from "001" through "120" in three digits.
≥ You cannot set the same ring time for Auto Answer Setting and Record
Message Setting. Set a different time for each.
Information
≥ When the FOMA phone automatically answers a videophone call, a substitute
image is sent to the other party. You can switch between the substitute image and
m during the videophone call. (See page 74)
+
the camera image by pressing
≥ If you activate Voice Mail Service or Call Forwarding Service together with Auto
Answer Setting and want to give priority to Auto Answer Setting over the service,
set its ring time shorter than that for Voice Mail Service or Call Forwarding
Service.
≥ Even if you connect the Flat-plug Earphone/Microphone with Switch while ringing,
Auto Answer setting does not work. However, if you disconnect it while ringing,
Auto Answer setting works.
≥ During 64K data communication, Auto Answer Setting does not work.
m
+
9
-
4
-
363

Advertisement

Table of Contents
loading

This manual is also suitable for:

Prosolid m

Table of Contents