Panasonic Foma p705im Instruction Manual page 345

< Multitask >
Multitask
The FOMA phone supports "Multitask" that enables you to use up to
three functions such as menu functions (see page 32) at the same
time. By combining Multiaccess and Multitask, you can use following
functions simultaneously (see page 438 for the combination patterns
of Multitask):
Mail group
i-mode mail and SMS functions
i-mode group
Menu functions inside "i-mode group" on Main Menu
Setting group
Menu functions inside "Setting group" on Main Menu
Tool group
Menu functions inside "Tool group" on Main Menu
Other functions which do not belong to the groups
Voice call, videophone call, 64K data communication, etc.
Mail group
Tool group
Start Another Function
1
When a function is running1x
1m(
For the icon of the group in use, "
is added.
When a single function is used, "
When multiple functions are used, "
If another menu function in the same group has already
been called up
The confirmation display appears asking whether to switch the functions. Select
"YES" to close the current menu function and the new menu function will be called
i-mode group
up.
Setting group
Information
≥ You are charged a call fee even when you are running other functions during a
call.
≥ If a call comes in while another function is working, the call might not be received
correctly. In that case, "Record message" or "Call Forwarding Service" may start
in a shorter time than the ring time specified for them.
≥ If you use Multitask to switch functions while executing another function whose
load of processing is high, delay may occur in displaying operation, and so on.
Switch Displays
When multiple menu functions are working, you can switch the
displays by pressing and holding x for at least one second. The
display switches from the latest one in chronological order.
)1Start another function.
" or another mark
" is displayed.
" is displayed.
When a function in the
Tool group is running
343