Redialing As A Voice Call When A Videophone Call Cannot Be Connected; Notify Switchable Mode - Panasonic Foma p705im Instruction Manual

Set by Call
You can set an image to be sent to the other party for making a
videophone call.
1
Enter a phone number
or
bring up the detailed display of a Phonebook entry,
redial item, dialed call record, or received call record.
i(
2
)1Select image1Chara-den
≥ To cancel the setting by call, select "Release". The setting is completed.
3
Select a Chara-den image.
< Voice Call Auto Redial >
Redialing as a Voice Call when a
Videophone Call cannot be Connected
If a videophone call cannot be connected, it will be automatically
redialed as a voice call.
1 m1Settings1Videophone
1Voice call auto redial1ON or OFF
Information
≥ The charges for calls once switched to voice calls are billed at the rates for the
voice calls.
≥ Voice Call Auto Redial does not work when a videophone call cannot be
connected such as when the line is busy or the other party's phone is in Public
Mode (Drive Mode). However, Voice Call Auto Redial works when you make a
videophone call to a phone that does not support the videophone function.
<

Notify Switchable Mode

>
Setting for Switching between a Voice
Call and a Videophone Call
You can let the other party know that your FOMA phone can switch
between a voice call and videophone call. This function is set to
"Indication ON" at the time of contract. When "Notify switchable
mode" is set to "Indication ON", the caller can switch between the
videophone call and voice call.
≥ You cannot operate "Notify switchable mode" when you are out of the service area
or radio waves do not reach, or during a call.
m1Settings1Videophone1Notify switchable mode
1
1Do the following operations.
Item
1YES1OK
Indication ON
1YES1OK
Indication OFF
Check indication You can check the setting of the function.
Operation/Explanation
77