Foma Pc Setup Software - Panasonic Foma p705im Instruction Manual

Uninstall FOMA Communication Setup
Files (Driver)
When uninstalling the "FOMA communication setup
files" (driver) is necessary (such as when upgrading the
version), perform the operation below. The operation
here explains how to uninstall the FOMA communication
setup files using Windows XP as an example.
≥Operate as the user who has the PC administrator right.
1
If the FOMA phone is connected to a personal
computer via the FOMA USB Cable with
Charge Function 01 (option), disconnect the
FOMA USB Cable with Charge Function 01.
2
" (Start)"1"
(Control panel)"1Open "
(Add and delete programs)".
3
Select "FOMA P705i
P705iCL USB" and click "
and delete)".
4
Click "OK".
5
Click " (Yes)" to restart Windows.
The uninstallation is then completed.
≥If you click "
(No)", restart Windows manually.
Information
≥ If you remove the FOMA USB Cable with Charge Function 01 from the
personal computer while installing the "FOMA communication setup
files" (driver) or click the "
installation, the "FOMA communication setup files" (driver) may not be
installed correctly. In this case, open "USB_Driver"
or "PROSOLID Drivers" "Win2k_XP" inside "FOMA P705i /
PROSOLID CD-ROM", and execute "p705iuun.exe" or
"p705clun.exe" to delete the "FOMA communication setup files"
(driver), and then install the files again.

FOMA PC Setup Software

To connect the FOMA phone to a personal computer
and perform the packet communication or 64K data
communication, you need to configure various settings
related to the communication. Using the "FOMA PC
setup software", you can easily carry out the settings
below. If required, you can set the packet
communication and 64K data communication without
using the "FOMA PC setup software". (See page 20 and
page 29)
USB" or "FOMA
(Change
(Cancel)" button to stop
"P705i Drivers"
Easy setting
You can easily carry out "dial-up creation for FOMA data communication"
and "Communication setup optimization" by following the guidance.
Communication setup optimization
Before using "FOMA packet communication", optimize communication
settings in your personal computer.
To maximize the communication performance, communication setup
optimization is needed.
Access point name (APN) setting
You can set an access point name (APN) required for packet
communication.
The FOMA packet communication does not use an ordinary phone
number as an access point unlike the 64K data communication.
You need to register an access point name (APN) in the FOMA phone in
advance, and specify the registration number (cid) in the access point
number field for connection.
By the default, "mopera.ne.jp", the access point name (APN) of "mopera",
is registered in cid 1, and "mopera.net", that of "mopera U", is registered
in cid 3. To connect to another service provider or Intranet LAN,
however, you need to set the access point name (APN).
"cid" is the abbreviation of "Context Identifier", the number for storing
the packet communication access point name (APN) to the FOMA
phone.
Information
≥If the old-version "W-TCP
old-version "FOMA
setup software)" or the older version than this "FOMA PC
(FOMA PC setup software)" (older than version 4.0.0) is installed,
uninstall it in advance.
8
(W-TCP setup software)", the
(FOMA data communication