Panasonic Foma p705im Instruction Manual page 350

When the time specified for "Alarm", "Schedule" or "ToDo"
comes
The alarm sounds for about five minutes (in the case of "Alarm", the alarm sounds for
specified time), and illumination lights. The vibrator works as you set for "Phone" of
"Vibrator". The set alarm message and an animation or i-motion movie linking to the
selected icon appear on the display.
≥ If you set "Snooze" of "Alarm" to "ON"
The alarm sounds for about one minute at an interval of five minutes, up to six
times, until Snooze is released by pressing h.
≥ During a call
The alarm sounds from the earpiece three times repeatedly.
≥ During operations
The FOMA phone works according to the setting of "Alarm setting". (See page 354)
≥ When you set an alarm to the time of another alarm
The alarm sounds in the priority order of "Alarm"
A missed schedule event or ToDo is notified by the "Missed alarm" icon.
≥ When the power is turned off
<Alarm>
When "Auto power ON" is set to "ON", the power automatically turns on to make an
alarm notification sound. When the auto-power setting is set to "OFF", an alarm
does not sound with the power stayed off. Even after turning the power on, the
"Missed alarm" icon is not displayed.
<Schedule/ToDo>
The alarm does not sound.
The "Missed alarm" icon is not displayed even after turning the power on.
≥ In Manner Mode
The vibrator and illumination light notify you. For Schedule/ToDo, a message is
also displayed. The alarm sounds at the volume set for Manner Mode. (See
page 99)
≥ During Lock All, Personal Data Lock or Omakase Lock
The alarm does not sound.
After releasing each lock, the "Missed alarm" icon is displayed to inform you of the
missed alarm. Further, if the power is turned off, the power does not turn on and
the "Missed alarm" icon does not appear even after releasing each lock.
≥ While SD-PIM is activated, during infrared data exchange, or during iC
communication
The alarm does not sound.
After each function is finished, the "Missed alarm" icon is displayed.
348
≥ While updating a software program
≥ If you set "Alarm setting" to "Alarm preferred" and the alarm time has come when
≥ You might not be able to set some i-motion movies or Chaku-uta Full
≥ Some i-motion movies set for the alarm might be played back only with sound at
≥ The Chaku-uta Full
"ToDo" "Schedule".
To clear alarm tone/alarm message, and animation/i-motion
movie from the display
Press any key to stop the alarm tone but the animation/i-motion movie changes to a
still image and the alarm message remains displayed. Press any key again (press
h if you set "Snooze" of "Alarm" to "ON") to clear the display. However, you
cannot clear the alarm message for the schedule event or ToDo item by pressing a
side key, with the FOMA phone closed. When a call comes in, the alarm stops
sounding.
When "Alarm" did not work
"Missed alarm" icon is displayed on the desktop. You can check that icon for the
contents of the missed alarm (Missed alarm information).
The latest missed alarm information that could not be notified is displayed.
The alarm does not sound.
When the specified time comes during rewriting the software program, the "Missed
alarm" icon is not displayed even after updating is completed.
Information
you are dialing, the alarm sounds after calling up the other party. If the alarm time
has come when receiving a call, the alarm sounds after starting communication.
for the alarm.
the specified time.
®
music file set for the alarm is played back only with sound at
the specified time.
The illumination for when you play back a demo to select an alarm tone might
differ from for when you are notified by an alarm.
®
music files