Panasonic Foma p705im Instruction Manual page 463

Update Pattern Data Automatically <Set Auto-update>
You can set whether to update the pattern data inside your FOMA
phone when the pattern data is created anew.
m1Settings1Lock/Security1Scanning function
1
1Set auto-update1ON or OFF
2
YES1OK
≥ When you select "ON" in step 1, the confirmation display appears telling that
your mobile phone information is sent at auto-update.
≥ To cancel during i-mode connection, select "Cancel".
Information
≥ When setting auto-update or updating automatically, the proper information about
your FOMA phone (model name, serial number, etc.) is automatically sent to the
server (DoCoMo-managed server for the scanning function). We at DoCoMo
never use the sent information for other purposes than for the scanning function.
≥ When auto-update is completed, the notification icon of "
appears on the Stand-by display.
If it is failed, " " (Pattern update failed) appears. Select "
update result.
Displays for Scanning Result
About the display for scanned problem elements
A warning display appears when problematic data
is found. Select "Detail" from the warning display
to bring up the name of the problem element.
≥ When six or more problem elements are found, the sixth
and later problem element names are omitted.
≥ "Detail" might not appear depending on the detected
problem element.
The displays for scanning result
Alert level 0
OK ... Continues the
operation.
Alert level 3
" (Update completed)
" to display the
YES ... Deletes the data
and ends the
operation.
NO ..... Stops and ends
the operation.
≥ The alert displays for when displaying i-mode mail messages or SMS messages
may differ from the ones above.
Check Pattern Data Version <Version>
1 m1Settings1Lock/Security
1Scanning function1Version
Alert level 1 Alert level 2
YES .... Stops and ends OK ....Stops and ends the
the operation. operation.
NO ..... Continues the
operation.
Alert level 4
OK .... Deletes the data
and ends the
operation.
461