Panasonic Foma p705im Instruction Manual page 369

<Example> Enter " " into a text memo.
m1Stationery1Text memo1Select <Not recorded>.
1
The Character Entry (Edit) display appears in prediction conversion mode
when "Predict" is set to "ON", and appears in ordinary conversion mode when
set to "OFF".
2
Enter hiragana characters in Kanji/Hiragana input mode.
Press 4 once and V o once.
Press 4 once and a once.
Press 5 five times.
Press 2 once.
Press 3 twice.
≥ You can enter up to 24 characters at a time. However, when "Predict" is set to
"ON", if you enter 6 or more characters, the conversion mode is automatically
switched to the ordinary conversion mode.
≥ When a character on the same key comes after a character, press
move the cursor, and enter the next character.
If you set "Character set time", you can omit the operation to move the cursor.
≥ To switch between uppercase and lowercase, press d after you have
entered characters.
≥ Each time you press c(
≥ If you set "Predict" to "ON", each time you press l, ordinary conversion
mode and prediction conversion mode switch.
≥ You can press i(
) to display the candidate list of alphanumeric or
katakana characters. Depending on the entered character, the conversion
candidates for date/time are displayed.
≥ To fix a character as it is without conversion, press
3 o to move the cursor onto " ". C
Use
≥ The conversion mode is automatically switched to the ordinary conversion
mode.
4 B o to move the cursor onto the candidate list
Use
o to highlight " M
1Use
≥ By pressing m(
)/c(
by page.
≥ When you press r while you are selecting a conversion candidate, the
Character Entry (Edit) display returns.
≥ Press c(
) to fix the whole paragraph.
o to V
), characters are displayed in reverse order.
o ( O
).
o ( O
" and press
), you can scroll the candidate list page
o to move the cursor onto the candidate list B
5
Use
M o to highlight "
1Use
The selected characters are fixed.
≥ When the character strings that are assumed to be the context forecast
candidates are found after fixing the characters, that context forecast
candidates are displayed. Press
list to enter the context forecast candidates.
≥ When you press r while you are selecting the context forecast
candidates, the Character Entry (Edit) display returns.
Information
≥ The learning function stores up to 1,000 words, and the character of a high
conversion rate goes up in the character order list.
≥ The candidate character strings are displayed from characters converted as usual
and from a dictionary downloaded from sites.
Only a small number of character strings are registered by default so candidate
characters might not be displayed in some cases. By doing the character conversion
as usual, the converted characters are added to the candidate characters.
You can download a dictionary from sites and add candidate characters from the
dictionary. However, when you delete the downloaded dictionary, the added
candidate characters are also deleted from the existing candidate characters.
(See page 169 and page 373)
≥ You can use Prediction Conversion and Context Forecast with 2-touch and
NIKO-touch in Kanji/Hiragana input mode.
≥ The number of kanji characters that you can convert to is limited so you might not
be able to convert to some kanji characters. You can use Kuten Code to enter
kanji characters that you cannot convert to. The number of characters you can
enter is 6355 in the JIS level-1 and level-2 kanji sets.
≥ Part of a complicated kanji character is deformed or left out.
Numbers of remaining characters and entered characters
On the Character Entry display, the number of remaining
characters and the maximum number of characters you can
enter are displayed in bytes. (The number of entered
characters is displayed by unit of characters, depending on
the function such as entering SMS text.)
). The number of characters in the Character Entry (Edit)
display is counted according to the following rules:
≥ One half-pitch character is counted as one byte and one
full-pitch character as two bytes.
≥ Full pitch:
5 characters (counted as 10 bytes)
Half pitch: 10 characters (counted as 10 bytes)
o ( O
" and press
o to move the cursor onto the candidate B
).
367