Panasonic Foma p705im Instruction Manual page 149

Function menu
1Shot interval1Select a shooting interval.
Cont. shooting set.
≥ You can set this only in "Auto" of Continuous Mode.
(Shot interval)
[Continuous Mode
only]
1Shot number1Enter the number of photos.
Cont. shooting set.
≥ When "Image size" is set to "VGA (640 x 480)" or "CIF (352 x
(Shot number)
[Continuous Mode 288)", you cannot change "Shot number".
≥ You can set this only in "Auto" or "Manual" of Continuous
only]
Mode.
Movie type set You can select whether to record both the video and voice, or
one of them when you shoot the moving image.
At Camera
1Normal, Video, or Voice
start-up
Normal
[Movie Mode only]
Display size You can set whether to display a moving image or still image in
the original size (Actual size) or to fit to the screen size on the
Finder display.
1Actual size or Fit in display
Common replay You can set a shooting size appropriate for attaching to i-mode
mode mail.
1YES
[Movie Mode only]
≥ Image Size is set to "QCIF", File Size Setting is set to "Mail
restrict'n (S)", and Image Quality (Movie Mode) is set to
"Normal".
Icon You can set whether to display icons.
1ON or OFF
Memory info You can display the used memory space (estimate)/number of
stored items.
Operation/Explanation
Information
<File size setting>
≥ When the "File size setting" is set to "Long time", "Store in" is set to "microSD".
<Camera settings>
≥ Note that the image may blur in Night Mode because the exposure takes a longer
time.
≥ If you set "Flicker correction" to "Auto", it may take a while to automatically adjust
the image quality. In this case, switch to Mode 1 or Mode 2 according to the power
frequency provided in the shooting location.
≥ Even if you change the setting of "Brightness", "White balance", "Color mode set",
or "Focus", the setting appropriate for each "Photo mode" applies when you
change "Photo mode".
<Storage setting>
≥ See "Select storage" for how to set a storage location on the microSD memory
card.
≥ If you change "File size setting" to "Long time", "Store in" is set to "microSD" and
"Storage setting" cannot be operated.
≥ When "Auto save set" is set to "ON", the image is saved to the latest folder if
"Select storage" is not set or the folder set as a destination folder is deleted.
<Img. stabilizer>
≥ This function is only for decreasing the degree of camera shake, so its effect
differs depending on the subject or condition.
≥ Image Stabilizer might not work effectively in the following cases:
When the camera shakes to a great extent
When zooming is in use
When shooting moving subjects
≥ When "Photo mode" of "Camera settings" is set to "Sports" or "Night mode", "Img.
stabilizer" becomes invalid.
≥ Residual images might remain in the area where the subject is moving, or noise
might be found in overall area. In that case, set this function to "OFF".
≥ When this function is activated, the processing time after shooting might be longer
about two seconds due to the processing by Image Stabilizer.
147