Panasonic Foma p705im Instruction Manual page 538

5
After the connection is completed, click "
≥You can start the browser software to browse web pages, use
e-mail and so on.
Information
≥Use the FOMA phone with the dial-up setting completed for dial-up
connection. To connect another FOMA phone, you may need to
reinstall the FOMA communication setup files (driver).
≥The power consumption of the FOMA phone increases during
communication.
≥During packet communication, the communication state appears on the
FOMA phone.
" " (Communicating, data sending)
" " (Communicating, data receiving)
" " (Communicating, no data sending/receiving)
" " (Outgoing or being disconnected)
" " (Incoming or being disconnected)
≥During 64K data communication, "
Disconnecting
1
Click the dial-up icon on
the task tray.
2
Select "
disconnect)", then click "
1Click "
(Close)".
Information
≥The communication line may not be disconnected by only exiting the
browser software. To surely disconnect the communication line,
perform this operation.
≥The baud rate displayed on your personal computer may be different
from the actual one.
(Close)".
" appears on the FOMA phone.
(Connect or
(Disconnect)"
When you cannot connect to network
If you cannot connect to network (if you fail a dial-up
connection), confirm the following items:
If this error occurs
Your personal Confirm whether your personal computer satisfies
computer cannot the operating environment (see page 2).
recognize "FOMA Confirm whether "FOMA communication setup
files" (driver) is installed in your personal computer.
P705i " or
Confirm whether the FOMA phone is connected to
"PROSOLID "
your personal computer and powered on.
Confirm whether the FOMA USB Cable with
Charge Function 01 (option) is securely connected.
You cannot connect Confirm whether the ID (user name) and password
to the access point are correct.
When you need to notify your caller ID such as
when using "mopera U" or "mopera", make sure
"184" is not prefixed to the phone number.
Confirm that "
control)" is checked in the modem properties.
If you cannot connect to the access point even
after confirming above, contact your Internet
service provider or network administrator for the
setting method, and so on.
Set 64K Data Communication
The operation below explains how to set the 64K data
communication without using "FOMA PC setup
software".
Setting dial-up connection and TCP/IP
The setting of dial-up connection and TCP/IP for the 64K
data communication is the same as for the packet
communication (see page 42).
Take care of the following points:
≥In the 64K data communication, you do not need to set an access
point name (APN). For the access point of the dial-up connection,
enter the phone number of the access point specified by your
Internet service provider or network administrator. (To connect to
"mopera U", enter "¢8701" in the phone number field. To connect to
"mopera", enter "¢9601" in the phone number field.)
≥Set "caller ID notified/not notified" and "others" as required.
(When connecting to "mopera U" or "mopera", you need to notify
your caller ID.)
≥Contact your Internet service provider or network administrator for
details on the setting contents.
Connecting and Disconnecting
You can operate in the same way as for the packet
communication. Perform the operations on page 40 or
page 44.
45
Confirm those:
(Use the flow