Panasonic Foma p705im Instruction Manual page 536

Set an Access Point Name (APN)
The operation below explains how to set an access
point name (APN) for packet communication. You can
register up to 10 access point names (APNs), which are
managed with cid1 to cid10.
When using "mopera U" or "mopera", you do not need
to set the access point name (APN).
The operation below is the example where you use
"XXX.abc" as the access point name (APN) and use the
FOMA USB Cable with Charge Function 01 (option). For
the actual access point name (APN), contact your
Internet service provider or network administrator.
The setting here will be the access point number for
dial-up network setting (see page 43).
Set Caller ID Notified/Not Notified
For packet communication, you can specify whether to
notify your caller ID (caller ID notified/not notified).
The caller ID is your important information; so, take a
great care to notify your caller ID. You can use AT
commands (¢DGPIR command) to specify "caller ID
notified/not notified" before dial-up connection.
Set Dial-up Network
1
" [ (Start)]"
1"
(Access point)"
1Click "
(Setup the connection or network)".
2
Select "
(Setup the dial-up connection)", then click
" (Next)".
3
If the display for selecting a modem appears,
click "FOMA P705i " or "PROSOLID
≥The display for selecting a modem appears only when you have
registered two or more modems.
4
Enter any name in the "
name)" field.
≥Here, "SAMPLE" is entered as an example.
5
Enter an access point number in the "
field.
≥When connecting to "mopera U", enter "¢99¢¢¢3#" as the
access point number.
6
Enter the user name and password supplied
from your Internet service provider or network
administrator in the "
and "
click " (Connect)"
1Click "
≥When connecting to "mopera U" or "mopera", you can leave the
user name and password fields blank.
≥Only confirm the setting contents without connecting here.
7
Click "
connection)" 1Click "
8
" [
point)"1Highlight the access point which is
finished with connection, and select "
(Property)" after the right click.
43
(Connection
(Phone number for dial-up)"
(User name)"
(Password)" fields. Then
(Skip)".
(Setup the
(Close)".
(Start)]"1" (Access
".