Panasonic Foma p705im Instruction Manual page 389

< 2in1 >
Using 2in1
You can use two phone numbers/mail addresses on your single FOMA
phone. By using respective modes, you can operate your FOMA
phone as if you are using two sets of them.
The following three modes are available with 2in1:
A Mode
You can use your phone number (Number A) to make calls and your i-mode mail
address (Address A) to send/receive mail messages, and can browse their related
data.
B Mode
You can use your 2in1 phone number (Number B) to make calls and access the
sites for Web mail (Address B), and can browse their related data.
Dual Mode
This mode has the functions of both A Mode and B Mode.
≥ For details on 2in1, refer to "Mobile Phone User's Guide [2in1]".
≥ Address B is used to send/receive mail messages via the dedicated Web mail site.
≥ You can use packet communication even in B Mode if you subscribe to i-mode.
≥ You can subscribe to either 2in1 or Multi Number.
≥ When you replace a UIM with another one (2in1 contractor
while using 2in1, perform "2in1 function OFF" (see page 388) and then set "2in1
setting" to "YES", or perform "Auto acquire No. B" (see page 356), to acquire the
correct Number B.
When you replace a UIM with another one (2in1 contractor
perform "2in1 function OFF" as well to update the owner's information to the
correct one.
≥ See page 390 for how this service works for each mode.
Activate 2in1
m1Service12in1 setting
1
1Enter your Terminal Security Code
1YES
When you activate 2in1, the 2in1 Menu display
appears.
≥ This display appears also by pressing and holding <
for at least one second with the FOMA phone open
and entering your Terminal Security Code.
Configure 2in1 Setting
1
2in1 Menu display1Do the following operations.
Item
Mode switching
Phonebook 2in1
setting
2in1 contractor)
2in1 non-contractor),
Stand-by display
2in1 Menu display
Operation/Explanation
You can switch to the mode you use.
1Select a mode.
≥ When 2in1 is activated, the display for selecting the mode
appears also by pressing and holding < for at least one
second with the Stand-by display shown, and entering your
Terminal Security Code.
≥ When "Mode link" is activated, the confirmation display
appears telling that the setting for "Receive avoidance set."
is also changed.
You can change Phonebook 2in1 Setting for the Phonebook
entry stored in the FOMA phone.
1Select an item.
Set to A . . . . . . . . . . Sets as the Phonebook entry for A. You
can use it in A Mode and Dual Mode.
Set to B . . . . . . . . . . Sets as the Phonebook entry for B. You
can use it in B Mode and Dual Mode.
Set to Common . . . Sets as the common Phonebook entry
for A and B. You can use it in all modes.
1Select a setting method.
Set one . . . . . Sets a Phonebook entry you call up.
Set some. . . . Select multiple Phonebook entries from the
Phonebook List you call up, then press
l(
).
Set group . . . Sets a Phonebook group you call up.
You can set the Stand-by display that appears in Dual Mode or
B Mode.
1Select a mode1Set the Stand-by display.
≥ See page 101 for how to set the Stand-by display. However,
"iαppli display" is not displayed.
≥ If you select "Release", the setting returns to the default.
387