Panasonic Foma p705im Instruction Manual page 515

5
Select the connection method.
<When you can select the COM port number of
"FOMA P705i " or "PROSOLID
Select the COM port number with which you install the "FOMA
P705i " or "PROSOLID
field, then click "OK".
Then, go to step 6.
≥Here, "COM3" is selected as an example. See page 20 for the
COM port number of "FOMA P705i " or "PROSOLID
should actually select in the "
<When you cannot select the COM port number of
"FOMA P705i " or "PROSOLID
Click " (Cancel)" to close the "
connection)" display, then perform the following operations:
(1) " (File)" menu Select "
(2) Select "FOMA P705i " or "PROSOLID
(Connection method)" field of the "
connection)" tab on the "Sample
properties)" display.
(3) Uncheck "
code and city code)".
(4) Click "OK".
Then, go to step 7.
6
The properties of the COM port number
appear on the display, then click "OK".
≥This display appears when you select a COM port number in
step 5.
">
" in the " (Connection method)"
" you
(Connection method)" field.
">
(Set a
(Properties)".
" in the "
(Set a
(Sample
(Use country/region
7
Set an access point name (APN).
Enter an access point name (APN) in the following format:
AT+CGDCONT = cid, "PDP_type", "APN"
cid: Enter 2 or any number from 4 through 10.
If you have already specified cid, be careful that its contents are
overwritten by the access point name you enter here.
"PDP_type": Enter "PPP" or "IP".
"APN": Enclose an access point name (APN) in double quotation
marks (").
(Example: When specifying APN "XXX.abc" in cid2)
AT+CGDCONT=2,"PPP","XXX.abc"
Enter this character string, then press
setting is completed.
≥To confirm the current APN setting, enter "AT+CGDCONT?
The set APNs are listed on the display.
8
Confirm that "OK" appears on the display.
9
" (File)" menu1Select "
(Exit Hyper Terminal)" to exit
Hyper Terminal.
≥If the message "
? (Currently connected. Do you want to disconnect this line?")
appears, select "
≥The message "
save session XXX?)" then appears. You do not need to especially
save that session.
Information
≥The access point name (APN) is information to be registered in the
FOMA phone, so if you connect another FOMA phone, you need to
register the access point name (APN) again.
≥To continue using the access point name (APN) of the personal
computer, register the same access point name (APN) for the same cid
number in the FOMA phone.
≥If the entered AT command is not displayed, enter "ATE1
cid (Registration number)
The FOMA phone has registration numbers, cid1 through cid10. cid1
contains "mopera.ne.jp" and cid3 contains "mopera.net" as an access point
name (APN) by default. To connect to a provider other than "mopera U" or
"mopera", you need to set the access point name (APN) to one of cid2 or
cid4 through cid10 as specified by the provider or network administrator.
Default cid contents
Registration No. (cid)
1
2
3
4 to 10
22
. If "OK" appears, the APN
(Yes)".
XXX ? (Do you want to
Access point name (APN)
mopera.ne.jp (mopera)
Not set
mopera.net (mopera U)
Not set
".
".