Lock Code - Panasonic G600 Service Manual
Personal cellular telephone, handheld portable, battery packs, handsfree car mount kit, easyfit car kit, hands free car kit, simple car kit, dc adaptor, dual charger, ac adaptor, data interface cable, sms interface cable
Hide thumbs
Also See for G600:
- Service manual (116 pages) ,
- Technical manual (45 pages) ,
- Service manual (113 pages)
Table of Contents
Advertisement
7.6
Lock Code
NOTE:
See section 7.2.1 for a list of the equipment and setup procedures required to perform the following adjustment and
calibration procedures.
To perform the following procedures the UUT must be placed into Test Mode.
7.6.1 Check current lock code
1. (Figure 29) At the Channel box press F4 and highlight VIEW LOCK CONDITION. Press ENTER.
Figure 29: View lock code
2. The display will show the current lock status and lock code for the UUT.
7.6.2 Change current lock code
1. At the Channel box press SHIFT and F4 and highlight PROG LOCK CONDITION. Press ENTER.
2. (Figure 30) Press ENTER to unlock the UUT. The current lock code will be used.
Figure 30: Program lock code
3. Enter "0000" to reset the UUT to factory defaults. The UUT will be locked using the lock code "0000".
MCUK980101C8
Service Manual
http://cxema.ru
Section 7
7 - 21
TEST AND MEASUREMENT
600-0740
600-0741
Issue 1
Revision 0
Advertisement
Table of Contents
