Adjusting Ring Volume; Putting An Incoming Call On Hold When You Cannot Answer At Once; Putting A Call On Hold During A Call - Panasonic Foma p705im Instruction Manual

< Ring Volume >

Adjusting Ring Volume

You can adjust the ring volume for incoming calls and mail.
m1Settings1Sound1Ring volume
1
1Select an incoming type
B o to adjust the volume.
1Use
≥ Following icons are displayed on the Stand-by display while the ring volume
is set to "Silent":
: The ring volume for voice calls or videophone calls is "Silent".
: The ring volume for mail, chat mail or Messages R/F is "Silent".
: The ring volume for voice calls or videophone calls is "Silent" and the
ring volume for mail, chat mail, or Messages R/F is "Silent".
≥ If you have set "Step", the ring tone is silent for about three seconds, and then
the volume steps up every three seconds, from Level 1 through Level 6.
≥ During ringing of a voice call or videophone call, you can adjust the ring volume
B o or by pressing and holding </> for at least one second.
also by pressing
However, you cannot adjust the ring volume in the following cases:
Ring Volume is set to "Step".
"Answer setting" is set to "Quick silent" and you stop the ring tone or voice
guidance.
During Manner Mode
Incoming calls within the ring start time specified by "Ring time"
< >
On Hold
Putting an Incoming Call on Hold when
You cannot Answer at Once
1
During ringing1h
The FOMA phone makes three rapid beeps for confirmation and the call is put
on answer-hold (On Hold).
≥ The confirmation tone does not sound while Manner Mode is activated or
when "Phone"/"Videophone" of "Ring volume" is "Silent".
≥ The other party hears the hold tone set for "On hold tone" of "Set hold tone".
For videophone calls, the still image set for "On hold" of "Select image" is
displayed.
o ( O
2
Press
m + 5 - 0 -
the call.
≥ If "Answer setting" is set to "Any key answer", you can release hold of voice
calls by pressing any key of 0 through 9, a, s, r, m,
c, o , <, >, l, or i. M
≥ If a videophone call is on hold, the substitute image is sent by pressing
O o (
Information
≥ The caller is charged for the call even during answer-hold (On Hold).
h during answer-hold (On Hold), the call will be disconnected. -
≥ If you press
< >
Holding

Putting a Call on Hold during a Call

1
During a
≥ The other party hears the hold tone set for "Holding tone" of "Set hold tone".
For videophone calls, the still image set for "Holding" of "Select image" is
displayed.
≥ You can put the call on hold by closing the FOMA phone during the call if you
have set "Setting when folded" to "Tone on".
O o (
2
Press
the call.
≥ If a videophone call is on hold, the substitute image is sent by pressing
O o (
≥ If you have set "Setting when folded" to "Tone on" and put the call on hold by
closing the FOMA phone, open the FOMA phone or connect the Flat-plug
Earphone/Microphone with Switch (option) to answer the call.
If you connect the Flat-plug Earphone/Microphone with Switch to answer the
videophone call, the substitute image is sent to the other party.
Information
≥ The caller is charged for the call even while the call is on hold.
≥ If a new call comes in while the current call is put on hold, the hold (Holding) is
released.
) or d to release hold and answer
) or d to release hold.
o (
call1O )
) or d to release hold and answer
) or d to release hold.
67