Panasonic Foma p705im Instruction Manual page 506

9
Click "OK".
The setting is completed.
Open the dial-up shortcut icon automatically created
on the desktop; then the connection display for
starting communications appears. After confirming that the
connection starts, you can start the Internet browser or mail browser
for communication. (See page 16)
≥To make the optimization valid, you need to restart the personal
computer.
Using a provider other than "mopera U" or
"mopera" as an access point
The packet communication is a communication system
you are charged according to the amount of data you
sent and received, regardless of the communication
time and distance. (Maximum download speed: 3.6
Mbps, Maximum upload speed: 384 kbps)
To use a provider other than "mopera", you may need to
separately apply for the service and sign a contract with
the provider.
1
Click "
2
Select "
(Packet communication (HIGH-SPEED
compatible terminal))", then click "
Confirm that "
communication (HIGH-SPEED compatible terminal))" is checked,
then click " (Next)".
3
Select " (Others)", then click "
(Next)".
Confirm that " (Others)" is checked, then click "
4
Click "OK".
≥The system obtains the access point name (APN) setting from the
FOMA phone connected to the personal computer. Wait for a
while.
(Easy Setting)".
HIGH-SPEED
(Next)".
HIGH-SPEED (Packet
(Next)".
5
Enter an access point name.
You can specify any name for the currently created connection.
Enter a plain name in the "
≥You cannot enter the following half-pitch characters:
¥, /, :, ¢, ?, !, <, >, |, and ".
≥In the "
APN
field, "mopera.ne.jp (PPP
is displayed as the default. Go to the "
access point name (APN)]" display.
≥For the setting of "
information from the provider and others. For overseas use, select
" (Not set)".
6
Click " (APN)
name (APN)]".
"mopera.ne.jp" is registered in "cid1" and "mopera.net" is registered in
"cid3" by default. Click "
point name (APN) for FOMA packet communication on the "
(APN) [Add an access point name (APN)]" display. Click "OK".
The "
returns. Select the access point name (APN) you specified newly. If it
is ok, click "OK".
≥For a provider access point name (APN) or supported connection
types, contact your provider.
7
Click "
The display for specifying "
(name server)" appears. When entering dial-up
information for the provider you have subscribed or Intranet LAN
system, specify addresses according to the entry instruction
information, then click "OK".
8
Click " (Next)".
13
(Access point name)" field.
[Select an access point name (APN)]"
) [mopera.ne.jp (PPP connection)]"
APN
(caller ID notification)", follow the
[Set an access point
(Add)", then enter the correct access
(Packet communication setting)" display
(Set detailed information)".
(IP address)" and "
[Set an