Technical Specifications - Automatic Technology Easy Slider Installation Instructions Manual

Sliding gate opener v24

Hide thumbs Also See for Easy Slider:

Installation instructions manual (42 pages)

Table Of Contents

Table of Contents

INPUT VOLTAGE:

TRANSFORMER PRIMARY VOLTAGE:

MOTOR TYPE:

MOTOR VOLTAGE:

MAXIMUM PULLING FORCE:

MAXIMUM GATE OPENING:

OPENER MAXIMUM

OPENING/CLOSING RUN TIME:

RECEIVER TYPE:

RECEIVER CODE STORAGE CAPACITY:

TRANSMITTER FREQUENCY:

CODING TYPE:

No. of CODE COMBINATIONS:

CODE GENERATION:

TRANSMITTER BATTERY:

Note:

1. The maximum opening that the EasySlider can be installed on is 5700mm wide and 250Kg. The gate must be well balanced. A

person should be able to move the gate manually with very little effort (15Kg force max.) in case of an emergency.

2. Intermittent operations may occur in areas which experience very strong wind gusts. A strong wind puts extra pressure on the gate

and tracks which may in turn trigger the safety obstruction detection system intermittently.

Please Note: Specifications are subject to change without notice.

SPECIFICATIONS