Table Of Contents - Automatic Technology Easy Slider Installation Instructions Manual

Automatic Technology Australia Pty Ltd to the extent that such may be lawfully excluded hereby expressly disclaims all
conditions or warranties, statutory or otherwise which may be implied by laws as conditions or warranties of purchase of an
Automatic Technology Australia Pty Ltd Sliding Gate Opener and Automatic Technology Australia Pty Ltd hereby
further expressly excludes all or any liability for any injury, damage, cost, expense or claim whatsoever suffered by any
person as a result whether directly or indirectly from failure to install the Automatic Technology Australia Sliding Gate
Opener in accordance with these installation instructions.
CONTENTS
PAGE CONTENTS
3 IMPORTANT SAFETY WARNINGS
4 FEATURES
5 PRODUCT DESCRIPTION
5 INSTALLATION OF DRIVE UNIT
7 INSTALLATION OF RACK
8 CONTROL BOARD LAYOUT
9 MENU STRUCTURE
10 INITIAL ELECTRICAL INSTALLATION
10 POWERING UP THE DRIVE UNIT
11 SETTING TRAVEL LIMITS FOR SINGLE GATE
12 SETTING TRAVEL LIMITS FOR DUAL GATES
15 SETTING PEDESTRIAN POSITION
16 DESCRIPTION OF STANDARD OPERATION
17 CONTROL BOARD ADJUSTMENTS
17 MENU 2 OBSTRUCTION MARGINS
17 MENU 3 AUTO-CLOSE TIMES
18 MENU 4 LOCK TIMES
18 MENU 5 LIGHT TIMES
18 MENU 6 MOTOR SETTINGS
19 MENU 7 OPERATING MODES
20 PARAMETER VIEWING AND EDITING
21 TRANSMITTER OVERVIEW
21 BASIC CODE TRANSMITTER PROCEDURE
22 TRANSMITTER EDIT PROCEDURE
23 TRANSMITTER LIST MANAGEMENT
24 CODE OPERATION (LOCATION EMPTY)
24 CODE OPERATION (LOCATION USED)
24 DELETE OPERATION
25 EDIT OPERATION
25 REMOTE CODE SET PROCEDURE
26 DIAGNOSTIC TOOLS (MENU 8)
26 MENU 8.1 TEST INPUTS
26 MENU 8.2 TEST TX'ERS
26 MENU 8.3 DISPLAY HISTORY
26 MENU 8.4 SERVICE COUNTER
27 MENU 8.5 COUNTERS
27 CLEARING MEMORY (MENU 9)
27 MENU 9.1 CLR CONTROLLER
27 MENU 9.2 CLR RECEIVER
27 MENU 9.3 CLR EXPANSION
27 MENU 9.4 CLR ALL
28 ACCESSORIES INSTALLATION
29 TROUBLE SHOOTING GUIDE
30 SYSTEM SPECIFICATIONS
31 PARTS LIST
32 WARRANTY AND EXCLUSION OF LIABILITY