Unix Setup; Zyxel Syslog Message Format - ZyXEL Communications P-660R-T1 Support Notes

Log Facility= Local 1
Types:
CDR= No
Packet triggered= No
Filter log= No
PPP log= No
Configuration:
1. Active, use the space bar to turn on the syslog option.
2. Syslog IP Address, enter the IP address of the UNIX serv
the syslog.
3. Log Facility, use the space bar to toggle between the 7 di
4. Ty pes, use the space bar to toggle the logs we are going to record.

UNIX Setup

1. Make sure that your syslog starts with -r argument.
-r, t his option will enable the f
Internet domain socket with the syslog services. The default setting is not enabled.
2. Edit the file /etc/syslog.conf by adding the following line at the end of the
/etc/syslog.conf file.
local1.* /var/log/zyxel.log
Where /var/log/ zyxel.log is the full path of the log file.
3. Restart syslogd.

ZyXEL Syslog Message Format

CDR
Call Detail Record (CDR)
Packet
The first 48 bytes o
triggered
the UNIX syslog server
No filters ar
Filter log
filter Log
PPP log
PPP events are logged when this field is set to Yes.
All contents copyright © 2005 ZyXEL Communications Corporation.
acility to receive message from the network using an
logs all data phone line activity if set to Yes.
r octets and protocol type of the triggering packet is sent to
when this field is set to Yes.
e logged when this field is set to No. Filters with the individual
field set to Yes are logged when this field is set to Yes.
P-660 series Support Notes
er that you wish to send
fferent local options.
89