Four-Digit Entry Code Time Zone; Five-Digit Entry Code Time Zone - DKS 1803 Owner's Manual

3.4.3 Four-Digit Entry Code Time Zone

This programming sequence sets up a time zone for the four-digit entry codes. This time zone uses a
range of four-digit entry codes and can be programmed for certain days of the week. This time zone
can be turned on and turned off after it is programmed (see operating instructions 5.2.4).

1. Press

2. Press (beep) to turn the time zone ON, or press
OFF.
3. Enter the beginning hour and minutes
codes that are within the boundaries of the time zone will begin to work at this time.)

4. Press (beep) for AM, or press
5. Enter the ending hour and minutes
codes that are within the boundaries of the time zone will cease to work at this time.)

6. Press (beep) for AM, or press
7. Enter the days of the week
the week, enter # in place of the day. For example, to have a time zone active on
Saturday and Sunday only (Sun = 1, Sat = 7), enter 1 7 # # # # #.
8. Enter the lower four-digit boundary
9. Enter the upper four-digit boundary

10. Press TOGETHER to end this programming step (beeeeeep).

3.4.4 Five-Digit Entry Code Time Zone

This programming sequence sets up a time zone for the five-digit entry codes. This time zone uses a
range of five-digit entry codes and can be programmed for certain days of the week. This time zone
can be turned on and turned off after it is programmed (see operating instructions 5.2.4).

1. Press

2. Press (beep) to turn the time zone ON, or press
OFF.
3. Enter the beginning hour and minutes
codes that are within the boundaries of the time zone will begin to work at this time.)

4. Press (beep) for AM, or press
5. Enter the ending hour and minutes
codes that are within the boundaries of the time zone will cease to work at this time.)

6. Press (beep) for AM, or press
7. Enter the days of the week
the week, enter # in place of the day. For example, to have a time zone active on
Saturday and Sunday only (Sun = 1, Sat = 7), enter 1 7 # # # # #.
8. Enter the lower five-digit boundary
9. Enter the upper five-digit boundary

10. Press TOGETHER to end this programming step (beeeeeep).
and enter the four-digit MASTER CODE


BBBBBBB
BBBB
BBBB
and enter the four-digit MASTER CODE


BBBBBBB
BBBBB
BBBBB
BBBB

(beep) to turn the time zone
BBBB
then press
(beep) for PM.
BBBB
then press
(beep) for PM.
then press (beep). To skip any days of
then press (beep).
then press (beep).
BBBB

(beep) to turn the time zone
BBBB
then press
(beep) for PM.
BBBB
then press
(beep) for PM.
then press (beep). To skip any days of
then press (beep).
then press (beep).
38
(beep).
(beep). (Four-digit entry
(beep). (Four-digit entry
(beep).
(beep). (Five-digit entry
(beep). (Five-digit entry