2 ] Charging Only - Denso BHT-4000 User Manual

[ 2 ] Charging Only

(1) Load a battery cartridge into the CU-4000.
(2) Power on the CU-4000.
The CU-4000 turns on the CHG
charging time differs depending upon the battery condition, but never more than
eight hours.
Upon completion of charging, the CHG
operation is completed.
(3) Press the battery ejection button to take out the battery cartridge.
Charging Operation and LED Indication
Operator's Action
Load a battery
cartridge into the
CU-4000.
⇓
Power on the CU-4000.
⇓
(After approx. 8 hours)
⇓
Take out the battery
cartridge.
II LED and starts charging the cartridge. The
II LED flashes, indicating that the charging
CU-4000 Status
Powered OFF
⇓
Ordinary charging
⇓
Trickle charging
⇓
On standby
143
Chapter 6. Handling the CU-4000
LED Indication
POWER DATA CHG I
POWER DATA CHG I
ON
POWER DATA CHG I
ON
POWER DATA CHG I
ON
CHG II
CHG II
ON
CHG II
Flashing
CHG II
OFF