Denso BHT-4000 User Manual page 4

How this book is organized
This manual is made up of six chapters and appendices.
Chapter 1. Quick Guide
Describes the basic operating method of the BHT-4000 and the related notes.
Chapter 2. Getting Started the BHT-4000 and System Mode
Summarizes the BHT-4000 system configuration and describes the operation including
preparation and System Mode (which is required for the efficient use of application
programs).
Chapter 3. Communications Operations of BHT-4000
Describes the communications operations of the BHT-4000--the RS-232C interface
specifications, the basic communications specifications, and the BHT-protocol--for
data transmission with the host computer or other devices.
Chapter 4. Easy Pack 4.2
Describes Easy Pack 4.2 which is an application program provided in the "BHT-BASIC
3.0 System Pack." Easy Pack 4.2 is suitable for data collection which allows bar code
reading or data entry from the keypad.
Chapter 5. Error Messages
Lists the error messages which will appear on the LCD if some error occurs in the BHT-
4000.
Chapter 6. Handling the CU-4000
Describes the handling procedure of the CU-4000, the interfacing with the host compu-
ter, and the charging of the battery cartridge.
Appendix A:
Appendix B:
Specifications
A Typical Basic Operation