System Errors - Denso BHT-4000 User Manual

5.1 System Errors

If some error occurs when the power is turned on or during program execution, one of
the following error messages will appear on the LCD.
*******************
** No System
*******************
==oÉéçêí=íç
====íÜÉ=éÉêëçååÉä
=======áå=ÅÜ~êÖÉ>>
===============
System Program not downloaded
Problem
System Program has not been downloaded.
**
Solution
Download System Program provided in the
"BHT-BASIC 3.0 System Pack". (For the
downloading procedure, refer to Chapter 2,
Subsection 2.3.2, [ 1 ].)
Memory backup test 1
Problem
An error is found in the system area of the
RAM during the memory backup test acti-
vated when the power is turned on.
(This error message will appear also when
the power is turned on without initialization
after downloading of System Program.)
EpF
Solution
Initialize the BHT-4000. (Refer to Chapter 2,
Subsection 2.3.2, [ 2 ].)
If the error persists, contact your nearest
dealer.
124
This error message will appear either
in English or Japanese.