Charging The Lithium-Ion Battery Cartridge (Using The Cu-7001) - Denso BHT-7000 User Manual

Handy terminal
Hide thumbs Also See for BHT-7000:
Table of Contents

Advertisement

5.5 Charging the Lithium-ion Battery
Cartridge (using the CU-7001)
You may charge lithium-ion battery cartridges loaded in the BHT.
Service Life of Lithium-ion Battery Cartridge:
Lithium-ion batteries used in the battery cartridge will gradually deteriorate during
the repeated cycles of charging and discharging due to its properties, even under
normal use. When the battery service period becomes shortened due to its deterio-
ration even if it has been charged for the specified hours, replace the battery
cartridge with a new one. Generally, it is necessary to replace the battery cartridge
after it has undergone approx. 300 cycles of charging and discharging operation.
(1)
Plug the AC adapter of the CU-7001 into the wall socket.
The POWER LED on the CU-7001 comes on.
(2)
Place the BHT loaded with a battery cartridge onto the CU-7001.
The BHT turns on the indicator LED in red and starts charging. The charging time
is approx. 4 hours.
Upon completion of charging, the indicator LED turns green.
(3)
Take the BHT off the CU-7001.
BHT-7000
CU-7001
The charging time is approx. 4 hours if the "Charge the battery!" message is
displayed on the BHT. The battery cartridge not discharged so much will be fully
recharged in shorter time.
120

Advertisement

Table of Contents
loading

Table of Contents