5 ] Selecting An Execution Program To Be Run When The Power Is First Applied - Denso BHT-4000 User Manual

[ 5 ] Selecting an Execution Program to be Run when the Power is
First Applied
(1) After completion of downloading, press C key twice to return to the SYSTEM
MENU screen shown below.
(2) Press 4 key to select "Set mode".
Press ENT key, and the following SET SYSTEM screen will appear.
(3) Press 1 key to select "Execute".
Press ENT key, and the following screen will appear. (The
program file name of Easy Pack 4.2. To run Easy Pack 4.2 practically, it is necessary
to create a file matching the job content in advance by referring to Chapter 4, Sub-
section 4.3.2.)
(4) By using F5 and F7 keys, move the cursor to a desired program (Easy Pack or
User Program) to be run when the power is first applied. Then press
(5) Press PW key to turn off the BHT-4000.
Chapter 2. Getting Started the BHT-4000 and System Mode
SYSTEM MENU
1:Execute 2:Download
3:Upload 4:Set mode
5:Test 6:Version
SET SYSTEM
1:Execute 2:Display
3:Date/Time 4:Barcode
5:Com 6:Switch
7:Others
SET EXECUTE PROGRAM
EASYPACK.PD3
SAMPLE1.PD3
SAMPLE2.PD3
SAMPLE3.PD3
37
is the
EASYPACK.PD3
ENT key.