Activesync/Wmdc Automatic Connection; Power Key; Battery Charging Mode - Denso BHT-1400QWB-CE Software User Manual

6.4.23. ActiveSync/WMDC Automatic Connection

6.4.24. Power key

6.4.25. Battery charging mode

Hold down the SHIFT key and press the 1 key while the System menu is
open. The Communication Settings menu shown on the left is displayed.
The BHT will connect to a network via the USB using ActiveSync/WMDC
automatically.
To set the BHT to automatically connect to a network via the USB using
ActiveSync/WMDC, check the "USB" box then tap OK button.
− Note −
System Properties
Hold down the SHIFT key and press the 2 key while the System menu is
open. The Power Key menu shown on the left is displayed.
Select the notification devices to notify that the BHT is turned on by the
power key.
LED:
Beeper:
Both the LED and Beeper can be selected at the same time.
System Properties
Hold down the SHIFT key and press the 8 key while the System menu is
open. The Battery menu shown on the left is displayed.
The Eco mode reduces power consumption compared to the Normal
mode when charging a battery while the BHT is turned off (in suspend
mode).
Normal
Eco
Select the Eco mode when the BHT using in the state of California.
System Properties
Automatic connection is enabled as default.
Blue LED (Default)
Beeper
Normal mode
Eco mode :
Complies with California appliance
efficiency regulations for battery chargers.
- 92 -