Errors In Easy Pack 4.2 - Denso BHT-4000 User Manual

5.3 Errors in Easy Pack 4.2

If some error occurs during execution of Easy Pack 4.2, one of the following error
messages will appear on the LCD.
==cáäÉ=åçí=ÑçìåÇ>>
==jÉãçêó=Ñìää>>
Problem
No data file is stored in the RAM
• when Easy Pack is initiated or
• when the manager's menu shifts to the
user's menu.
Or the "Delete File" operation results in no
file existing in the RAM.
Solution
Press F4 key while holding down SF key
to shift to the manager's menu, then create
one or more data files in the "Create File"
mode.
(Refer to Chapter 4, Subsection 4.3.2, [ 1 ].)
Problem
The memory runs out during data collection
in the "Collect Data" mode of the user's menu
or during file creation in the "Create File"
mode of the manager's menu.
Solution
After two seconds, the screen if in the "Col-
lect Data" mode automatically returns to the
user's menu screen; the screen if in the "Cre-
ate File" mode, to the manager's menu
screen. Upload the file being accessed and
delete the data in the "Delete Data" mode of
the user's menu, or delete unnecessary files
in the "Delete File" mode of the manager's
menu.
(Refer to Chapter 4, Subsection 4.3.1, [ 4 ]
and Subsection 4.3.2, [ 2 ].)
131
Chapter 5. Error Messages