4 ] "Delete Data" Mode - Denso BHT-4000 User Manual

[ 4 ] "Delete Data" Mode

You can delete current data collected in the "Collect Data" mode and registered in the
selected data file, without erasing the file conditions prepared in the "Create File"
mode of the manager's menu.
Pressing 4 key on the user's menu displays the screen as shown below.
==aÉäÉíÉ=a~í~
==cáäÉN=\
========NWvÉë=OWkç
Difference between the "Delete Data" mode in the user's menu and the "Delete
File" mode in the manager's menu is the following: The "Delete Data" mode erases
only the data in the file; the "Delete File" mode erases the file itself. For data files
which are unnecessary, use the "Delete File" mode.
To delete data, press 1 key. The beeper
beeps and the screen shifts to the user's
menu.
To cancel this operation, press 2 key. The
data remains as it is and the screen shifts to
the user's menu.
112