Switching On And Off - Otto Bock skippi Instructions For Use Manual

Operation
Fig. 31 LCD display with all symbols
1 Direction indicator, left
2 Battery charge level
3 Electric backrest
4 Electric seat tilt
5 Control panel
6 Drive-away lock
7 Speed level
8 Open-end wrench
50 | Ottobock
9 Excess temperature
10 Direction indicator, right
11 Brake for drive wheels
12 Warning
13 Creep speed
14 Power module
15 Drive motor
16 Light

6.3.2 Switching on and off

WARNING
Danger to life due to lack of brake functionality. The
brake release lever must be locked when using the power
wheelchair. The automatic brake must be operational and
functional.
CAUTION
Risk of accidents due to incorrect tyre pressure. The
power wheelchair must be visually inspected prior to each
use to ensure that the tread depth is sufficient and that the
tyres are inflated to the correct pressure. Incorrect tyre
pressure reduces the life of the tyres and impairs the driv-
ing characteristics.
The power wheelchair controls are turned on or off by press-
ing the on/off button (see fig. 30, item 5). The wheelchair
turns off automatically if the control panel is not used for an
extended period of time. It is also possible to switch the
power wheelchair off with the on/off button while driving. In
this case, the wheelchair brakes immediately until it comes
to a stop.
Skippi