Checking User-Defined Essence Marks; Formatting Discs - Sony PDW-HD1200 Operation Manual

2
Select Clear Planning Metadata, and then press the
PUSH SET(S.SEL) knob.
A message appears asking if you are sure that you want
to clear the planning metadata.
3
Select OK, and then press the PUSH SET(S.SEL)
knob.
The planning metadata is cleared from this unit's
memory.
To switch the title display in the display
window
When planning metadata is loaded into this unit, you can
select the format of the title to display in the display
window.
See page 66 for more information about GUI screen
operations.
1
Display the Disc Menu.
2
Select Settings, and then press the PUSH SET(S.SEL)
knob.
3
Select Planning Clip Name in Clip Info. Area and then
press the PUSH SET(S.SEL) knob.
See page 20 for more information about the clip
information area.
4
Select one of the following, and then press the PUSH
SET(S.SEL) knob.
ASCII Clip Name: Display the ASCII format title
(see page 142)
Clip Name: Display the UTF-8 format title (see
page 142)
Checking user-defined essence
marks
You can display the names of user-defined Shot Mark0 to
Shot Mark9 essence marks in planning metadata (UTF-8
format, maximum 32 bytes).
1
Display the Planning Metadata Properties screen (see
page 86) for the planning metadata loaded into this
unit.
The , button is enabled when the planning metadata
contains user-defined essence marks (see page 143).
2
Press ,, and then turn the PUSH SET(S.SEL) knob.
The User Defined Essence Marks screen appears.

Formatting discs

See page 66 for more information about GUI screen
operations.
1
Display the Disc Menu.
2
Select Format Disc, and then press the PUSH
SET(S.SEL) knob.
A message appears asking you to confirm the format.
Format Disc
All Clips, Clip Lists and
Non-AV Data (General Files)
will be Deleted.
Format OK?
3
Select OK, and then press the PUSH SET(S.SEL)
knob.
To cancel the format
Select Cancel, and then press the PUSH SET(S.SEL)
knob.
To continue by formatting another disc
Exchange the disc, select OK, and then press the
PUSH SET(S.SEL) knob.
To exit the formatting screen
Press the PUSH SET(S.SEL) knob with Exit selected.
To disable the Format Disc command
To prevent inadvertent disc formatting, resulting in the
loss of recorded data, you can disable the Format Disc
command.
See page 66 for more information about GUI screen
operations.
OK
Cancel
87
Disc Operations