Sony PDW-HD1200 Operation Manual page 149

Alarm message in time Alarm message in video monitor screen Description/action
data display area
REC INHI.! AUTO FORMATTING WAS NOT
COMPLETED.
THE DISC WRITE PROTECT TAB IS SET
TO SAVE.
PLEASE EJECT DISC.
THE DISC WRITE PROTECT TAB IS SET
TO SAVE.
AUTO FORMATTING WAS NOT
COMPLETED.
REC INHIBIT MODE IS SELECTED.
CHECK FUNCTION MENU.
PLEASE EJECT DISC.
REC INHIBIT.
b) NO CLIP.
No Clip!
a) DISC TOP.
Disc Top!
DISC END.
a)
Disc End!
Clip Top! CLIP TOP.
Clip End! CLIP END.
MAX # Clips DISC CANNOT BE RECORDED TO.
FOR MORE RECORDING, DELETE
SOME CLIPS.
MAX # Files DISC CANNOT BE RECORDED TO.
FOR MORE RECORDING SPACE,
DELETE CLIPS OR NON-AV DATA.
(GENERAL FILES)
Disc Full! DISC FULL.
FOR MORE RECORDING, DELETE
SOME CLIPS.
b) NO MORE SUB CLIPS CAN BE ADDED
MAX# SB CLP
TO CLIP LIST.
b) DURATION OF ONE CLIP LIST MUST BE
CL OVER DUR
LESS THAN 24 HOURS.
Set the disc's Write Inhibit tab to enable recording
(see page 48).
This appears when REC INH on the HOME page of
the function menu is set to "ON".
Set REC INH to "OFF" (see page 43).
This appears if you press the REC button when a disc
error has occurred. Correct the disc error and try
again.
This appears when a playback, search or delete
operation is attempted on a disc with no clips
recorded on it.
Insert a disc with clips recorded on it.
This appears if you press the PREV button or conduct
a high-speed reverse search when the unit is stopped
at the start of the disc.
Use forward search or playback instead.
This appears if you press the NEXT button or conduct
a forward high-speed search when the unit is stopped
at the end of the disc.
Use reverse search or playback instead.
This appears in single clip playback mode if you
execute a reverse search when the unit is stopped at
the first frame of a clip. To move to another clip, press
the PREV, NEXT, SHIFT + PREV, or SHIFT + NEXT
button, or perform a thumbnail search.
This appears in single clip playback mode if you
execute a forward search when the unit is stopped at
the last frame of a clip. To move to another clip, press
the PREV, NEXT, SHIFT + PREV, or SHIFT + NEXT
button, or perform a thumbnail search.
Delete unneeded clips, or insert a disc with enough
free space.
Delete clips or GENERAL files.
Delete unneeded clips, or insert a disc with enough
free space.
This appears when an attempt is made to add sub
clips when 300 sub clips have already been
registered.
Limit the creation of sub clips to 300 or fewer.
This appears when you try to add a sub clip when the
total duration of sub clips in a clip list has already
reached 24 hours.
Create clip lists so that the total duration is within 24
hours.
149
Troubleshooting