Sony PDW-HD1200 Operation Manual page 86

4
Select the desired planning metadata file, and then
press the PUSH SET(S.SEL) knob.
The selected planning metadata file is loaded into the
unit's memory, and the Planning Metadata Properties
screen appears.
5
Check the information that appears, and press the
PUSH SET(S.SEL) knob.
To sort planning metadata
You can sort planning metadata by operating in the same
way as in "To sort clip lists" (page 84). However, in step
3, select Sort Planning Metadata by....
The planning metadata will be displayed in the specified
order the next time you load planning metadata.
To check planning metadata properties
You can check the properties of the planning metadata that
is loaded into this unit's memory, including the date and
time of creation and the clip titles.
See page 66 for more information about GUI screen
operations.
1
Display the Disc Menu.
2
Select Planning Metadata Properties, and then press
the PUSH SET(S.SEL) knob.
The Planning Metadata Properties screen appears.
File Name: Planning metadata file name
Assign ID: Assign ID
Created: Date and time of creation
Modified: Date and time of most recent modification
Modified by: Name of person who modified the file
1)
Title1: Title 1
Title2: Title 2
Material Gp: Number of clips recorded with this
planning metadata
1)This can be set as the clip name (see page 142).
86
Disc Operations
To scroll hidden parts of the string into view
When a b or B mark is displayed for an item, you can
press the B/IN or b/OUT button to scroll the display
by one character for each press.
The V/MARK1 and v/MARK2 buttons scroll the
beginning and end of the string into view.
To return to the previous screen
Press the PUSH SET(S.SEL) knob.
To change the serial numbers of clip
names using planning metadata
You can change the serial numbers that are added to clip
names that use planning metadata.
See page 66 for more information about GUI screen
operations.
1
Display the Disc Menu.
2
Select Planning Clip Name Suffix (change the serial
number added to clip names created by using planning
metadata), and then press the PUSH SET(S.SEL)
knob.
The Planning Clip Name Suffix screen appears.
3
Use the </IN or ,/OUT button to select a digit to
change.
4
Turn the PUSH SET(S.SEL) knob to change the digit.
5
Repeat steps 3 and 4 as required.
6
Press the PUSH SET(S.SEL) knob.
"OK" is selected.
7
Press the PUSH SET(S.SEL) knob.
To clear planning metadata
See page 66 for more information about GUI screen
operations.
1
Display the Disc Menu.