Sony PDW-HD1200 Operation Manual page 138

Item
M3F: FACTORY SETUP
Item
M40: EXTENDED MENU
M41: CUSTOMIZE
M46: MENU M461: MENU
DATA STATUS
CONTROL DISPLAY
M462: SAVE
MENU DATA
M463: LOAD
MENU DATA
M47: SETUP BANK4
M48: AUTO RECALL
M49: RESET ALL SETUP
Item
M50: DHCP
M51: IP ADDRESS PRESET
138
Maintenance Menu
M3: OTHERS: Other setting items
Setting
For details, refer to the Maintenance Manual.
M4: SETUP MAINTENANCE: Items relating to the setup menu
Setting
Select whether to display the extended menu.
DISABLE: Do not display.
ENABLE: Display.
Select whether to enable the customization function of the setup menu.
DISABLE: Do not display.
ENABLE: Display.
Displays the status of the menu bank where the current menu settings are stored.
Select whether to temporarily back up (save) setup menu settings before operations such as
software upgrades.
SAVE function button (F5): Back up (save) the settings.
MENU button: Return to next highest menu level without backing up.
Select whether to restore (load) setting that were backed up (saved) with the "SAVE MENU
DATA" item.
SAVE function button (F5): Restore (load) the settings.
MENU button: Return to the next highest menu level without restoring.
Select the bank to be stored in menu bank 4, or reset menu bank 4.
CURRENT TO BANK4: Store the current menu settings in menu bank 4.
BANK1 TO BANK4: Store the menu bank 1 settings in menu bank 4.
BANK2 TO BANK4: Store the menu bank 2 settings in menu bank 4.
BANK3 TO BANK4: Store the menu bank 3 settings in menu bank 4.
RESET BANK4: Reset menu bank 4.
Select whether to recall settings automatically from a menu bank when the system is
powered on, and if so which menu bank to recall from.
off: Do not recall settings from a menu bank.
from BANK1: Recall settings from menu bank 1.
from BANK2: Recall settings from menu bank 2.
from BANK3: Recall settings from menu bank 3.
from BANK4: Recall settings from menu bank 4.
Reset the current menu settings to the factory settings.
SAVE function button (F5): Reset.
MENU button: Return to the next highest menu level without resetting.
Notes
• The system frequency setting is also cleared. If you execute this item, reset the system
frequency (see page 28).
• Date and time settings are not cleared, but the time zone setting is cleared. After executing
this item, reset the time zone (see page 28).
M5: NETWORK: Items relating to network settings
Setting
Set whether to assign an IP address automatically with the DHCP server.
DISABLE: Do not assign automatically.
ENABLE: Assign automatically.
Set the IP address of this unit.
192.168.001.010
Notes
• IP address cannot be set when DHCP is set to "ENABLE".
• To check the automatically acquired IP address of this unit, close the maintenance menu
and then open it again.