Items In The Basic Menu - Sony PDW-HD1200 Operation Manual

Item group Function
Items Settings relating to control
100 to 199 panels
Items Settings relating to the remote
200 to 299 control interface
Items Settings relating to editing
300 to 399 operations
Items Settings relating to preroll
400 to 499
Items Settings relating to disc
500 to 599 protection

Items in the basic menu

The basic menu items (excluding the items related to the
digital hours meter) are listed in the following table.
• Item names are the names which appear on the video
monitor screen of this unit and an external monitor,
when the input signals to the monitor are the video
signals output from the COMPOSITE OUTPUT 2
(SUPER) connector, SDSDI OUTPUT 2 (SUPER)
connector, HDSDI OUTPUT 2 (SUPER) connector, or
Item number Item name
001 PREROLL TIME
002 CHARACTER H-POSITION
003 CHARACTER V-POSITION
Item group
Refer to
Items
page 121
600 to 650
Items
page 124
651 to 699
Items
page 124
700 to 799
Items
page 125
800 to 899
Items
page 125
900 to 999
HDMI OUT connector. An abbreviated name appears in
the time data display area when you press the SHIFT
button.
• The values in the Settings column are the values which
appear in the time data display area. (The values may
appear in a different format on an external monitor. In
this case, the external monitor values are shown in
parentheses.) Underlined values are the factory defaults.
Settings
0 s (0 sec)... 5 s (5 sec)... 30 s (30 sec): Set the preroll time to between 0
and 30 seconds in steps of 1 second.
A preroll time of at least 5 seconds is recommended when using this unit for
editing.
Adjust the horizontal screen position (as a hexadecimal value) of the text
information output from the COMPOSITE OUTPUT 2 (SUPER) connector,
SDSDI OUTPUT 2 (SUPER) connector, HDSDI OUTPUT 2 (SUPER)
connector, or HDMI OUT connector for superimposed display on the
monitor. The hexadecimal value 00 is for the far left of the screen. Increasing
the value moves the position of the characters to the right.
00 ... 0C ... 28 (When the number of system lines is 1080 and the
system frequency is 59.94i or 50i.)
Set this item by adjusting to the required position while viewing the monitor.
Adjust the vertical screen position (as a hexadecimal value) of the text
information output from the COMPOSITE OUTPUT 2 (SUPER) connector,
SDSDI OUTPUT 2 (SUPER) connector, HDSDI OUTPUT 2 (SUPER)
connector, or HDMI OUT connector for superimposed display on the
monitor. The hexadecimal value 00 is for the top of the screen. Increasing
the value lowers the position of the characters.
00 ... 2A ... 32 (When the number of system lines is 1080 and the
system frequency is 59.94i or 50i.)
Set this item by adjusting to the required position while viewing the monitor.
Function
Settings relating to the
timecode generator
Settings relating to the
metadata and UMID
Settings relating to video
control
Settings relating to audio
control
Settings relating to digital
processing
Refer to
page 125
page 126
page 128
page 130
page 131
115
Setup Menu