Managing Clip Lists - Sony PDW-HD1200 Operation Manual

To preset the frequently used timecode
Select Save Preset TC in the Thumbnail Menu, and
then press the PUSH SET(S.SEL) knob.
The timecode set in steps 4 and 5 is saved as a preset
value.
To recall the preset timecode
Select Recall Preset TC in the Thumbnail Menu, and
then press the PUSH SET(S.SEL) knob.
6
Press the PUSH SET(S.SEL) knob.
OK is selected.
7
Press the PUSH SET(S.SEL) knob again.
8
Save the clip list (see page 83).
To save clip lists
To save under a specified name
See page 66 for more information about thumbnail screen
operations.
1
In the clip list thumbnail screen, display the Disc
Menu.
2
Select Save Clip List as..., and then press the PUSH
SET(S.SEL) knob.
A list of clip lists appears.
Disc Menu
Save Clip List as...
DVD og BI... 08 AUG2007 11:50
E0003 03 AUG2007 17:51
E0004 03 AUG2007 17:51
E0005 03 AUG2007 17:51
E0006 03 AUG2007 17:51
E0007 03 AUG2007 17:51
E0095 18 MAY2006 10:25
E0098 13 JUN2006 13:43
To switch the information displayed for clip lists
Press the b/OUT button.
With each press, the display changes in the order:
"Name & Date" >"Name & Title" >"Name & Sort
Date" >...
To sort clip lists
Select one of the following orders by selecting
Settings >Sort Clip List by... in the Disc Menu.
Name(A-Z): Sort in ascending order by clip list name.
Date(Newest First): Sort by date and time of clip list
creation, newest first.
Name & Date/Sorted by Name
Display Select
3
Select the desired clip list name, and then press the
PUSH SET(S.SEL) knob.
To save under the same name
The following procedure saves the current clip list under
its current name (the name that appears in the clip list
thumbnail screen).
See page 66 for more information about thumbnail screen
operations.
1
In the clip list thumbnail screen, display the Disc
Menu (see page 65).
2
Select Save Clip List, and then press the PUSH
SET(S.SEL) knob.
The clip list is saved. However, Save Clip List as... is
executed when the name displayed in the clip list
thumbnail screen is "no name".
Note
If you press the EJECT button or the on/standby button
before saving a new or edited clip list, a message appears
asking if you want to discard your changes and continue.
Follow the instructions in the message to continue or
cancel the operation.

Managing clip lists

To load clip lists
The following procedure loads a clip list stored on the disc
into the unit's internal memory as the current clip list.
See page 66 for more information about thumbnail screen
operations.
1
In the clip list thumbnail screen, display the Disc
Menu.
2
Select Load Clip List, and then press the PUSH
SET(S.SEL) knob.
A list of clip lists stored on the disc appears.
Disc Menu
Load Clip List
DVD og BI... 08 AUG2007 11:50
E0003 03 AUG2007 17:51
E0004 03 AUG2007 17:51
E0005 03 AUG2007 17:51
E0006 03 AUG2007 17:51
E0007 03 AUG2007 17:51
E0095 18 MAY2006 10:25
E0098 13 JUN2006 13:43
Name & Date/Sorted by Name
Display Select
Scene Selection (Clip List Editing)
83