Sony PDW-HD1200 Operation Manual page 137

Item
M38: F-KEY For details, refer to the Maintenance Manual.
CONFIG
M380: HOME2
M381: PAGE8 ASSIGN
M382: PAGE8 NAME
M38F: NV-RAM
CONTROL
M39: OTHER M390: MIXED REC
CONFIG
M391: VITC REC
M392: PB POS
M3B: VANC RX M3B0: VANC RX
PARAMETER PACKET
Sub-item
1 LINE
2 DID
3 SDID
M3B1: LINE1 SEL
M3B2: LINE2 SEL
M3D: DATE/TIME PRESET
M3E: USB MEMORY UTIL
M3: OTHERS: Other setting items
Setting
Assign a function menu item to page HOME2 of the function menu as a user
setting.
Assign a setup menu item to page P8 of the function menu as a user setting.
Specify the name of a setup menu item assigned with M381: PAGE8 ASSIGN.
Save the settings of M380 to M382.
Select whether to enable mixed format recording mode.
DISABLE: Do not enable.
ENABLE: Enable.
Select whether to record the VITC in the input HDSDI signals in the LTC user bits
area.
DISABLE: Do not record.
ENABLE: Record.
When you switch between the clip playback screen and the clip list playback
screen, specifies the clip or sub clip playback start position.
KEEP: Play from the position where playback stopped.
FORCED TOP: Play from the first frame of the first clip or sub clip.
For setting HDSDI VANC data input parameters
This setting is required for recording and playback of closed captions. For details,
see page 162.
Notes
• Selecting the line also selects the corresponding line in the second field (for
example, if line 9 is selected, line 572 is also selected for VANC packet
reception).
• Menu item M3B0 enables recording of one VANC packet when the selected line
contains any packets whose DID/SDID matches the value set with this menu
item.
• Up to four packets are recorded per each line regardless of the DID and SDID
for the VANC set with menu item M3B1 or M3B2.
• It is not possible to set the same line with menu items M3B0, M3B1, and M3B2.
If the same line is specified, priority is given in the order of M3B0, M3B1, and
M3B2 (for example, if the same line is specified with M3B0 and M3B1, the
setting with M3B1 is ignored).
• When VANC data is output to HDSDI playback signals, the number of the
output VANC line is the same as that of the input VANC line.
• When a UMID or essence mark line is selected with M3B1 or M3B2, UMID or
essence mark output takes priority. To disable UMID or essence mark output,
set setup menu item 651 or 657 to "off".
Selects the LINE for the VANC to be received.
OFF, 9LINE to 20LINE (59.94i/50i mode)
Specification of the DID of the VANC to receive
00h-FFh
Specification of the SDID of the VANC to receive
00h-FFh
Selects the LINE to be received for the HDSDI VANC data.
OFF, 9LINE to 20LINE (59.94i/50i mode)
Selects the LINE to be received for the HDSDI VANC data.
OFF, 9LINE to 20LINE (59.94i/50i mode)
Specifies the year, month, day, time, and time zone.
For installation of software upgrade
For details, refer to the Maintenance Manual.
137
Maintenance Menu