Sony PDW-HD1200 Operation Manual page 21

All remaining clips or clip list playback time
Total number of clips recorded on disc
Clip name
Clip names are displayed according to the setting of
Settings >Display Title in the Disc Menu (see page 65).
However, clip names are always displayed during
playback.
If you are using planning metadata and press the REC
button in stop mode, the name of the clip to be recorded
next appears.
The following characters can be displayed as clip names in
this area.
• Digits: 0 to 9
• Alphabetic characters: a to z, A to Z
• The following symbols: !, ", #, $, %, &, ', (, ), *, +, ,
(comma), -, . (period), /, : (colon), ; (semicolon), <, =, >,
?, @, [, ], ^, _, {, |, }, ~
• Space
d Recording format
Displays the system frequency and the video and audio
formats.
59.94i HD422-1080 50Mbps
Video format
System frequency
e Time data display area
A Remaining disc recording capacity
B REC RUN/FREE RUN
C Timecode generator mode
D VITC
E Time data type
G Recording mode indication
A Remaining disc recording capacity: Displays the
amount of recording capacity remaining on the disc.
Number of current clip
8CH-24BIT
Audio format
F Time data
B REC RUN/FREE RUN: Displays the timecode run
mode. The run mode is set with RUN MODE on page
P5 TC of the function menu (see page 45).
C Timecode generator mode: Displays the timecode
source and generation method (preset or regenerate).
These are set with PRST/RGN and TCG on page P5
TC of the function menu (see page 45).
D VITC: Lights in the following cases.
• When VITC is read in playback mode. (This has no
relations to the display in the time data display
area.)
• When VITC recording is possible.
E Time data type: Displays the type of time data
displayed in the time data display area. The type of
time data is selected with CNTR SEL on the HOME
page of the function menu (see page 43).
Display Type of time data
TC Timecode
COUNTER Elapsed recording/playback time
UB User bits
VITC VITC
VIUB VIUB
TCG Timecode generator value
UBG User bits generator value
F Time data: Normally displays timecode or VITC,
according to the selection made with TCR on page P5
TC of the function menu.
G Recording mode indication: This appears when setup
menu item 150 REC MODE is set to "disc exchange
cache" or "clip continuous rec" (see page 123).
See page 51 for more information about the disc
exchange cache function.
See page 52 for more information about the Clip
Continuous Rec function.
f Disc information
59.94i
422-1080
50Mbps
8CH-24BIT
A Disc loaded indication/usable format: When a disc is
loaded in this unit, a disc loaded indication appears.
When no disc is loaded, the usable formats are
displayed.
The background color of the disc loaded mark
indicates one of the following disc states.
A Disc loaded indication/usable
format
B System frequency
C Video format
D Audio format
Front Panel
21