Sony PDW-HD1200 Operation Manual page 124

Item number Item name
201 PARA RUN
214 REMOTE INTERFACE
257 NETWORK ENABLE
258 LIVE LOGGING MODE
a) FTP connections can be made only when the device connected to the
REMOTE(9P) connector (D-sub 9 pin) is in stop mode. During FTP
Item number Item name
301 VAR SPEED RANGE FOR
SYNCHRONIZATION
320 DIGITAL AUDIO PB PROCESS ON
EDIT POINT
124
Setup Menu
Menu items in the 200s, relating to the remote control interface
Settings
Select whether to use synchronized operation, when you have connected
two or more PDW-HD1200 units in a daisy chain or distributed
configuration, and are using external control from a VTR or a remote
controller such as the RM-280.
dis (disable): No synchronized operation
ena (enable): Use synchronized operation
Notes
• If you are controlling from a VTR, select "ena" on all of the
PDW-HD1200 units.
• If you controlling from the RM-280 or another remote control device,
select "dis" on one of the PDW-HD1200 units and select "ena" on all of
the other PDW-HD1200 units.
When the remote control switch is set to REMOTE, select the device from
which to remote-control this unit.
9PIN: Device connected to the REMOTE(9P) connector.
SDI: Device connected to the SD/HDSDI INPUT connector.
Select the remote control switch positions which enable network
connections.
net (network): Only when the switch is set to "NET".
n&9P (network & remote(9PIN)): When the switch is set to "NET", and
when the switch is set to "REMOTE" and setup menu item 214 is set
to "9PIN".
Specify the Live Logging operation mode.
off: Disable the Live Logging function.
live (live mode): Select Live mode. Supported operations are metadata
editing only.
view (live view mode): Select Live View mode. Supported operations
are proxy AV data streaming and metadata editing.
Notes
• In Live View mode, the run mode is always Free Run, regardless of the
setting of RUN MODE on page P5 TC of the function menu. It is not
possible to preset the timecode to be recorded.
• The Disc Exchange Cache function and Clip Continuous Rec function
cannot be enabled in Live View mode.
• FAM or FTP connections cannot be established during a Live View
mode connection. Live view mode connections cannot be established
during a FAM or FTP connection.
Menu items in the 300s, relating to editing operations
Settings
Select the playback speed range when carrying out playback in variable
speed mode from a remote control unit connected to the REMOTE(9P)
connector.
–1~+1: –1 to +1 times normal speed.
wide: –1.20 to +1.20 times normal speed.
Specify the handling of audio at edit points and at the second and
subsequent recording start points in Clip Continuous Rec recording.
cut: Carry out a cut (possibly resulting in audio discontinuities at the edit
point).
fade: Fade out and fade in.
a)
connections, the device connected to the REMOTE(9P) connector cannot
be used to control this unit.