Sony PDW-HD1200 Operation Manual page 122

Item number Item name
102 MAXIMUM SPEED
105 REFERENCE SYSTEM ALARM
107 REC INHIBIT LAMP FLASHING
108 AUTO EE SELECT
109 FORCED EE WHEN DISC UNLOAD During disc loading/unloading and when no disc is inserted, select
114 AUDIO MONITOR OUTPUT LEVEL
118 KEY INHIBIT
Sub-item
1 FUNCTION-KEY
2 CONTROL PANEL
119 VARIABLE SPEED LIMIT IN KEY
PANEL CONTROL
121 FRAME PB MODE
130 DISPLAY DIMMER CONTROL
122
Setup Menu
Menu items in the 100s, relating to the control panels
Settings
Specify the search speed in F.FWD/F.REV mode (forward and reverse
high-speed search) and shuttle mode.
MX/20 (maximum (shuttle x20)): F.FWD/F.REV mode: Maximum speed,
Shuttle mode: ±20 times normal speed
MAX (maximum): F.FWD/F.REV mode: Maximum speed, Shuttle mode:
maximum speed
Note
Maximum speed is about ±30 times normal speed. However, the
maximum speed may vary depending on the state of the clip and the
playback position on the disc.
Select whether to display a warning when the reference video signal is
not being supplied, or when it differs from this unit's system frequency.
off: No warning.
on: Flash the STOP button as a warning.
Select whether to flash the REC INHI indicator when recording is
prevented (see "REC INHI (recording inhibit) indicator" (page 19).
off: Light the REC INHI indicator.
on: Flash the REC INHI indicator.
When a disc is inserted and PB/EE on the HOME page of the function
menu is set to "EE", select the operation modes in which input video and
audio signals are automatically handled in E-E mode.
S/F/R (stop/f.fwd/f.rev): In stop/fast-forward/fast-reverse modes
stop: In stop mode
whether to control the output signal PB/EE setting.
on: Do not control (the signal is always an E-E signal).
off: Control.
Select whether to control the level of the audio signal output from the
AUDIO MONITOR R, L connectors with the LEVEL knob for the
PHONES jack.
var (variable): Control.
fixed: Do not control.
Select which buttons can be operated when the KEY INHI switch is set to
"ON". The following sub-items control different sets of buttons
independently.
Select whether function buttons on the front panel are enabled.
dis (disable): Disabled.
ena (enable): Enabled.
Select operable buttons on the front panel are enabled.
dis (disable): Disabled.
ena (enable): Enabled.
Select the playback speed range when carrying out playback in variable
speed mode from the front panel of this unit.
off (off (–1 to +1)): –1 to +1 times normal speed.
on (on ( 0 to +1)): 0 to +1 times normal speed.
Select the variable playback field/frame mode.
auto: Field playback
frame: Frame playback. Compared to field playback, frame playback
gives more detail during playback of still pictures.
Set the brightness of the indication on the LCD.
10%, 25%, 50%, 75%, 100%