Settings; Setting The User Interface; To Set The Sounds - Sony MSU-1000 Operation Manual

10
[Exit]
Press .
The Network screen reappears.
11
Set the TCP/IP.
[TCP/IP]
1 Press .
The TCP/IP screen appears.
TCP/IP
IP Address
192 168 0
Subnet Mask
255 255 255
Default Gateway
0 0 0
Set Cancel
2 Set the IP address, Subnet mask, and Default
Gateway.
Press the corresponding input field, and then use the
numeric keypad on the screen to enter the information.
[Set]
3 Press .
12
[Exit]
Press .
The Network screen reappears and the control panel is
set to MCS mode.
Engineer Mode Exit
1_ 7 8 9
4 5 6
0
1 2 3
0
BS 0 Enter

Settings

For details on menu operation, see "Menus" (page 35).

Setting the User Interface

To set the sounds

The control panel plays a sound when call signals are
received, and when the panel is operated.
Turn ON/OFF the sounds or adjust the volume if necessary.
1
Display the MSU Config screen. (page 35)
MSU Config
Display
Mode
/Sound
Security
2
[Display/Sound]
Press .
The Display/Sound screen appears.
3
[Sound]
Press and highlight
The Sound submenu appears.
Display/Sound
Sound LED LCD
Sound
Clear
Call Touch SW
Sound
Test
Volume Sound
50 1
Exit
Date/Time Information
.
Exit
Touch
EL
Panel
OFF
RE
Call
Sound
Master
50
Settings
23