Front Panel - Sony PDW-HD1200 Operation Manual

Names and Functions of
Parts

Front Panel

The names and symbols of buttons and knobs on the front
panel are color coded according to function.
White: Function when the button or knob is operated
independently.
1 On/standby button and
indicator
2 ACCESS indicator
1 Audio level adjustment
section (see page 15)
3 Remote control switch
4 KEY INHI switch
5 PHONES jack
6 LEVEL adjustment knob
5 Recording and playback control section (see page 18)
a On/standby (1) button and indicator
When the POWER switch on the rear panel is in the @
position, and when DC power is connected to the DC IN
12V connector on the rear panel, this switches the unit
between the operating state (the indicator is lit green) and
the standby state (the indicator is lit red).
When the indicator is lit red, pressing the button switches
this unit to the operating state, and the indicator lights
continuously green.
When the indicator is lit green, pressing the button
switches the unit to the standby state, and the indicator
14
Front Panel
ACCESS
CH-1 CH-3
ALL CH
CH-2 CH-4
CHAPTER
EXPAND
VARIABLE KEY INHI
REC PAGE
NET ON
PRE-
LOCAL
SET
OFF
REMOTE
HOME
PB
PREV PLAY NEXT
PHONES LEVEL
DISPLAY
SHIFT
TOP F REV F FWD END
Chapter
Orange: Function when the button is operated with the
SHIFT button held down.
Blue: Function related to thumbnail operations.
EJECT
PUSH SET(S.SEL) MARK1
IN OUT
MENU
MARK2
SHTL/JOG
VAR/JOG
RESET
RETURN
STOP REC
THUMBNAIL
SUB CLIP
DISC MENU
STANDBY REC INHI
lights continuously red. If a disc is loaded in the unit, the
indicator flashes before changing to continuously lit red.
When using this unit, normally leave the rear panel
POWER switch in the @ (on) position, and use this button
to switch the unit between the operating state and standby
state.
b ACCESS indicator
This lights when the disc is accessed and when a file is
opened by a FAM or FTP connection (see page 97). If the
on/standby button is pressed while this indicator is lit,
2
Handle
7 Disc slot and EJECT
button
2 Arrow buttons (see
page 15)
3 Shuttle/jog/variable
control section (see
page 16)
4 Display/menu control
section (see page 17)