Table of Contents
Advertisement
7.
If you perfonn subtests 01 or 02, only the Track Number is specified.
If you perfonnsubtest 03, the Track Number, Head Number, Sector Number, and
Number of Sectors are not specified.
If you perfonn subtest 04, the Track Number, Head Number, Sector Number, Number
of Sectors, and Data Pattern must all be specified.
If you perfonn subtest 05, the Track Number, Sector Number, and Number of Sectors
must be specified.
8.
Type in the start track number, then press Enter. If you perfonn subtests 01 or 05,
the following message will appear.
Mount the Work disk(s) on the drive(s),
then press [Enter] key.
If you perfonn subtests 02 through 04, the following message will appear.
[Warning:
The content of the disk(s),
will be destroyed]
Mount the Work disk(s) on the drive(s),
then press [Enter] key.
9.
If the inserted floppy disk is your work disk, press Enter. The FD D test will now run.
3-22
Advertisement
Chapters
Table of Contents
