Toshiba Tl000LE User Manual page 61

Subtest 05
Subtest 06
Subtest 07
Card modem loop back
NOTE: If there is no modem card in the system, this test cannot
be executed.
This subtest is used for checking if the data sent from the modem card to the
RS-232-C line is correct. This can be done with the loopback function inside
the modem card.
Card modem on-line
NOTE: This test requires two machines which are connected to
the PBX (Private Branch Exchange). One machine is set
as 'send' and the other as 'receive'. When both machines
are ready, you can start the test.
In this subtest, data is sent from the 'send' machine to the 'receive' machine
through the PBX. This subtest is used for checking whether data transmission
through a telephone line is done properly.
Dial tester test
NOTE: To execute this subtest, a dial tester must be connected to
the system.
This subtest is carried out by automatically sending the pulse dial and tone dial
twice.
[Pulse dial] "1-2-3-4-5-6-7-8-9-0-1-2"
[Tone dial] "1-2-3-4-5-6-7-8-9-*-0-#"
3-27