Toshiba Tl000LE User Manual page 76

3.17
LOG UTILITIES
3.17.1 Program Description
This program logs error information generated while a test is in progress; the information is
stored in RAM. However, if the POWER switch is turned off, the error information will be
lost. The error information itself is displayed as follows.
1. Error count (ERR)
2. Test name (TST)
3. Subtest number (SB)
4. Pass count (PASS)
5. Error status (STS)
6. FDD/HDD or memory address (ADDRESS)
7. Write data (WD)
8. Read data (RD)
9. HDC status (HSTS)
10. Error status name (NAME)
This program can store data on a floppy disk or output information to a printer.
3.17.2 Operations
1. After pressing 3 and Enter in the DIAGNOSTICS MENU, the error
information logged in RAM or on the floppy disk is displayed as shown
below.
ERROR LOG UTILITIES PAGE 01 TOTAL ERROR=[xxxx]
ERR TST SB PASS STS ADDRESS WD RD HSTS NAME
(CCCHSS)
2. If error information is displayed on the screen, the following will appear.
(l)Next (2)Prev (3)Exit (4)Clear (S)FD Write (6)FD Read (7)Print
3-42