Table of Contents
Advertisement
(4)
Type a track number (four digits) and press
Enter.
(The fIrst three digits are
the cylinder number and the last digit is the head number.) This executes the
formatting of good tracks or bad tracks as indicated.
NOTE:
This program can format only one track per operation. If it is
desired to format several good tracks or bad tracks, repeat
the operation as many times as necessary.
(5)
After formatting the track of the hard disk, the Format complete
message will appear.
(6)
Press
Enter
to return to the HARD DISK FORMAT MENU.
4.
Bad track CHECK selection
(1)
When bad track CHECK is selected, the following message will appear:
Drive number select (1:#1,2:#2)
?
(2)
Select a drive number. Type the drive number and press
Enter.
The
following message will appear.
Interleave number (1/1-3)
?
(3)
Select an interleave number (usually select 1). Type the number and press
Enter.
Then the following message appears, and bad tracks of the hard disk
are checked.
[ HDD TYPE ]
[ HDD TYPE ]
[ HDD TYPE ]
CYLINDER = xxx
HEAD
SECTOR
= x
=
xx
[[cylinder, head = xxx xl]
(4)
After checking the bad tracks of the hard disk, the Format complete
message will appear.
(5)
Press
Enter
to return to the HARD DISK FORMAT MENU.
3-49
Advertisement
Chapters
Table of Contents
