Toshiba Tl000LE User Manual page 88

3.23 FDD AND HDD DUMP
This command displays the dump list for both the FDD and HDD.
3.23.1 Program Description
This program displays the contents of floppy disks (both 3.5-inch and 5.25-inch) and hard
disks (designated sectors).
3.23.2 Operations
1. After running MS-DOS, insert the Diagnostics Disk in the floppy disk drive. Type
in
A:FDDMP
and press
Enter.
The following message appears:
DIAGNOSTICS - HARD DISK
&
FLOPPY DISK DUMP : Vx.xx
Format type select (O:2DD,1:2D,2:2HD,3:HDD)
?
2.
Select a format type number. Type the number. If 3 is selected, the dump lists for
the hard disk are displayed automatically (see step 8 below).
0: Displays a dump list for a floppy disk (2DD).
1: Displays a dump list for a floppy disk (2D).
2: Displays a dump list for a floppy disk (2HD).
3: Displays a dump list for a hard disk (HDD).
3. If 0, 1, or 2 is selected, the following message will appear.
Select FDD number (1:A/2:B)
?
4. Select an FDD drive number by typing in 1 or 2. The following message will appear:
Insert source disk into drive A:
Press any key when ready.
5. Remove the Diagnostics Disk from the FDD and insert a source disk; press any key.
The Track number
??
message will appear. Type the track number and press
Enter.
6. The Head number
?
message will appear. Type the head number and press
Enter.
7. TheSector number
??
message will appear. Type the sector number and press
Enter.
The dump list for the floppy disk will be displayed.
3-54