Table of Contents
Advertisement
4.
Remove the source disk from the FDD and insert the fonnatted work disk; press any
key. The [[ track, head
=
xxx x ] ] message will appear and start the copying
to a target disk. When copying cannot be done with one operation, the message in step
2 above is displayed again. Repeat the operation.
After the floppy disk has been copied, the following message will appear:
Copy complete
Another copy (l:Yes/2:No) ?
5.
If you type 1 the display will return to the message in step I above. If you type 2 the
display will return to the DIAGNOSTICS MENU.
3-53
Advertisement
Chapters
Table of Contents
